Remove two screws to glove box take it out completely and saw offf plastic bar in front of filter(it is only a molding bar for dash bar set-up not needed) then pull out cabin filter and replace and then screw in glove box compartment
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
cabin filter is located under the hood on passenger side right next to the windshield . to access the filter you have to pop up the steel clips with the screw driver then pull the filter cover out and now you can access the filter
Usually the cabin filter is located under the air draw that is directly below your windshield wipers. The air draw is the vents next to the windshield. Access is normally a few screws or bolts. Then replace the filter.
The cabin air filter is the filter thats filter in coming air for your heater-A/C system it is located behind your glove box in the heater box next to the blower motor you access it after removing the glove box or extending it fully down out of the way .
The cabin air filter is located by the passenger floor board, if you have a dual or triple zone a/c unit. If the unit is just a single zone unit there is no cabin air filter.
Underneath the glove box (next to the floor) there is a rectangular cover. Remove the cover and the cabin air filter is located above that.
Just remove the filter and install the new one.