Question about 2004 Mazda 3

1 Answer

Removing the alternator from a Mazda familiar

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i replace my alternator on my Mazda3 2004

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix...? how do I install crankshaft sensor for Mazda familiar zl engine please help


Mazda familiar is a ford mazda clone
hard to find the exact CAS you require online

in short ...its close to the harmonic balancer

26227379-ruh0it1i30kfmyinqfd3ogcx-3-0.jpg

Jun 28, 2016 | Mazda Cars & Trucks

1 Answer

How do I replace my alternater belt in my Mazda 626 lx


If the alternator is on the top in the open, just loosen the alternator bolts a little bit. Then push the alternator to loosen the belt to remove it. Do the opposite to put the new belt on.

If the alternator is buried under a lot of other things, it's a lot tougher job.
Hope this helps.

Sep 26, 2014 | 1995 Mazda 626

1 Answer

How do you replace an alternator from 2002 Mazda 626 V6 engine?


FIRST TURN OFF RADIO.REMOVE NEGATIVE BATTERY CABLE.REMOVE FRESH AIR DUCT.REMOVE RADIATOR UPPER BRACKET.REMOVE CONDENSOR FAN IF EQUIPPED.REMOVE ELECTRICAL CONNECTORS FROM THE ALTERNATOR.LOOSEN THE BELT TENSIONER LOCK NUT AND TENSION ADJUSTING BOLT.REMOVE ALTERNATOR UPPER MOUNTING BOLT.REMOVE RIGHT SPLASH SHIELD. REMOVE DRIVE BELT FROM THE ALTERNATOR PULLEY.REMOVE AC COMPRESSOR AND SUPPORT IT ASIDE LEAVING THE REFRIGERANT LINES CONNECTED.REMOVE ALTERNATOR THROUGH BOLT.THEN REMOVE ALTERNATOR.

Mar 01, 2011 | 2003 Mazda Mazda6

1 Answer

How do you get the alternator out?


I am trying to remove the alternator in a 2004 Mazda Tribute--I have removed the belt, dropped the crossmember, removed the exhaust under the alternator, and taken loose the axel carrier support in hopes that it would move far enough to remove the alternator but it doesn't have enough flex.

Nov 11, 2010 | 2004 Mazda Tribute

1 Answer

2001 mazda mpv - Got the alternator disconnected and unbolted. How to get it out


YOU NEED TO REMOVE SUBFRAME TRANSVERSE SECTION.YOU HAVE TO REMOVE EXHAUST FRONT PIPE.THEN REMOVE RIGHT AXLE SHAFT AND CENTER SHAFT ASSEMBLY.THEN YOU CAN REMOVE ALTERNATOR.

Jun 26, 2010 | 2001 Mazda MPV

2 Answers

I can not get the alternator out


ok im a mazda tech i won a price for doing this for mazda
alot of techs were taking off the drive shaft and mazda was paying to much for the warranty labor haha

loose and remove the alternator and move it out of the way
from the alternator braket
what going to do next is remove the alternator braket its 3 or 4 bolts
remove joint shaft too
remove it completely and you can remove the alternator its a snug fit but its been done and going back in its the same prossedure alternator in first and braket next
braket torque bolts to 29 to 41 ft lbs

May 14, 2010 | 2002 Mazda Tribute

1 Answer

What are the steps to replace a 1999 Mazda 626 V6 alternator? Thanks


Remove cables from alternator. Loosen tensioner bolt. Remove belt. Replace alternator. Replace belt. Tighten tensioner bolt. Replace cables and done. Mike. Rate 100% please.

Sep 22, 2009 | 1999 Mazda 626

1 Answer

Changed battery and alternator, now radio and power locks don't work


I'm not real familiar with Mazda but you probably need to re-enter a code for the radio and re-program your key fob for your alarm....both processes should be outlined in your owner's manual. I would also check your fuses which may have been blown when switching out your battery. Hope this helps!

Aug 25, 2009 | 2002 Mazda Tribute

1 Answer

How do i replace the alternator on mazda mpv 2000?


Remove negative (-) battery terminal from battery. Remove drive belt from alternator pulley. Remove wiring harness (electrical connections) from alternator. Remove attaching bolts for alternator. Pry out alternator. Reverse steps to reinstall. 

Dec 23, 2008 | 2000 Mazda MPV

3 Answers

Replace alternator


I have a 2001 Mazda Tribute. To change the alternator; the factory procedure at the dealership says to drop the sub-frame from under the front of the vehicle. Then everything is accessable. The tech at the dealership told me how they do it: (Its not easy!!) 1. Remove the right front tire 2. Remove dust pan from right front 3. Remove the brake caliper and caliper bracket 4. Remove the 2 bolts from the half shaft support bracket 5. Remove the half shaft axle assembly 6. Remove the serpentine belt 7. Remove the 3 bolts holding the alternator in place 8. Remove the 3 bolts holding the alternator mounting bracket 9. Remove the alternator mounting bracket 10. Remove the electrical connection on the alternator 11. Remove the alternator by turning the alternator until it will come out of the opening 12. Repeat process in reverse for installation. I did this twice in two weeks because of a bad alternator. The studs that are spot welded on the half shaft bracket will try to keep you from being able to remove the alternator. The left stud on the bracket popped out, when we were removing the alternator and it seemed to make it easier to get the alternator out. I just put a lock washer on the back side of the stud when I mounted the half shaft and it worked fine. Good luck

May 15, 2008 | 2002 Mazda Tribute

Not finding what you are looking for?
2004 Mazda 3 Logo

Related Topics:

724 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...