Question about 2003 Chevrolet Silverado 2500HD

3 Answers

Power windows and door locks don't work on 2006 silverado

Posted by on

  • Anonymous Oct 02, 2008

    i have the same problem with my 2005 the keyless remote passenger window and door lock dont work

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It's not the girlfriend, it is the PDM, passanger door module, got mine a rock auto for 120.00, need to get the one specific for your VIN, not on most parts lists, it is a control board for all power windows and locks and the keyless entry. My cadillac was doing exsactly what your truck is doing. once you put the new one in you need to reprogram the remotes, not too hard, hold down lock button on drivers door, ignition on/off twice, let go of the door lock button, press both unlock, lock buttons and hold untill you hear the lock unlock. your program sequence might be slightlyl different check the web.
good luck.

Posted on Nov 16, 2008

  • caresio Nov 16, 2008

    sorry thought it was obvious but maybe not, the PDM sits below the window and lock buttons on the passanger door. you need to remove the door inner panel and replace the PDM.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Some locksmiths can reprogram keyless remote. Call first.

Posted on Oct 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2003 silverado EX-cab I let the girlfriend drive the truck one night and when i went to get into the truck the next day i found my remote wouldn't unlock the doors. After i opened the truck with my key i'm goining down the road and found my passengers door wasn't working at all. No door lock, No window down/up, No mirrow movement at all..
I'd like to say i'm a grade A parts changer so if anyone has any thought as to what needs to be replaced please let me know. Don't know if i'll be able to find this page so if you could email me a link or your thoughts that would be great Truespeedfreek at hotmail dot com
Thanks much

Posted on Sep 09, 2008

2 Suggested Answers

SOURCE: 2003 chevy silverado

It needs a new right side door module it requires programing

Posted on Aug 16, 2008

cj2176
  • 520 Answers

SOURCE: no power to passenger door window or lock, drivers

I know this sounds strange but I believe the problem is in the drivers door. This is where the master switch is and controls the other doors. Have it tested or replaced. Hope this helps. Good luck.

Posted on Mar 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Chevy extended cab 1500 and the controls on my driver side door aren't working. The door is saying it ajar when it's closed. I can't roll the windows up or down. Is it the master switch?


How to fix the Chev power window door lock switch - YouTube

? 5:04
https://www.youtube.com/watch?v=XDKaDURD8Sc
Jul 13, 2013 - Uploaded by spelunkerd
How to fix the Chev power window door lock switch ..... Some time later my drivers side window stopped working in the down position. ... These intermittent electrical problems are frustrating,aren't they? .... How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban ...

Diagnose Power Door Locks Dont Work Properly - Auto ...

www.auto-repair-help.com/.../diagnose_power_door_locks_dont_work_...
An inoperative power door lock can be caused by the switch, solenoid, wiring problem or ... Hi, I have a 2005 Nissan Sentra and the power locks aren't working. .... Hi, mypassenger door locks/unlocks both doors but my driver side door works independently and .... I have a 1986 Chevy Silverado K10 with auto door locks.

SilveradoSierra.com • 2003 silverado no power in right door ...

www.silveradosierra.com/.../2003-silverado-no-power-in-right-door-t30...

Dec 26, 2015 | Cars & Trucks

1 Answer

No dome with door open and no window drop


Chevrolet Silverado 1500 Questions - went out to go to work ...

www.cargurus.com > Questions > Chevrolet > Silverado 1500
CarGurusFeb 28, 2014 - No, If new battery or fully charged the truck and radio would work, at least for a little while. ... issues, radio, door chime, power windows and door locks all still not ... The BCM wake-ups are: Door ajar switches Door handle switches Domelamp ... any door is opened and then the power lock switch is pressed.

Sep 16, 2015 | Cars & Trucks

1 Answer

Door panel removal


there should be screws near the inner handle and check around the perimeter of the plastic panel

May 02, 2014 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

2006 equinox drivers door lock not working


Test to see if you have power going to the door lock motor, if you do, then motor is bad, if you don't then there is a shorted wire or switch

Jun 09, 2012 | 2006 Chevrolet Equinox

1 Answer

Power window, power locks ,and power mirrors don't work on my gmc envoy 2006 but the other controlers work in the vehical.


I assume you are talking about the controller on the driver's door. The Driver's Door Module is likely defective. For troubleshooting purposes, you can swap in the passenger side module to verify.

Aug 05, 2011 | 2006 GMC Envoy

4 Answers

I have a 2008 chevy silverado crew cab and one of the door locks doesn't move


This is a very common problem on all chevy trucks for this year. The door lock solenoids are integrated into the door latch assembly, and are notoriously weak. They will work fine sometimes, others they just seem to barely move or not at all. You will need to replaced the door lock / latch assembly for the affected door.

Jan 27, 2011 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

Need to remove left rear door panel


  1. If equipped, remove the window crank handle by using a retaining clip removal tool.
  2. Remove the door handle bezel by inserting a flat trim removal tool between the door panel and handle bezel to release the locking tabs.
  3. Remove all door panel electrical connectors .
  4. Remove the door panel push pins and trim screws. Lift the door panel up and out to release the door panel locking tabs.

May 22, 2009 | 2006 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

1,145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...