Question about 2000 Ford Ranger SuperCab

2 Answers

I have a 2000 ford ranger 3.0 flex fuel. my wipers are giving me trouble so i pulled the wiper relay out to check it. all was ok so i put the relay back in the same cavity only now the motor will not turn over. just like the battery wasn't in it.i bought the truck about 1 year ago and the anti theft light has been flashing ever since i bought it. if anyone can give me some ideas how to get the truck running i would most gratefully appreciated. thank you in advance for your time and help.my e-mail is dave61438@yahoo.com

Posted by on

  • Anonymous Nov 23, 2008

    Took out a relay and same thing happened. Now the light flashes erratically. Is there some sort of reset?

  • Anonymous Dec 03, 2008

    i have a 1997 ford f 150 truck the wipers quite working so i bought new wiper motor and new wiper switch still not working , getting power to it but still not working please help....

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

MmmmYou may have a relay fuse 10 amp circuit burned out. If the fuse has a hair line crack in it you will not see it, test it on a meter for continuity. don't burn up too much time on this one. It may very well be a ignition relay gone bad. Most models have two circuit fuses, check both fuse boxs inside and under the hood fuse panels. You'll need the manuel to tell what fuse goes where. Electrical schematics would help you.

Posted on Nov 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Took truck to dealer and fixed it

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the relay location in the relay box


The problem would be in the stalk controller. The wiper Relay is what provides power to the motor for all settings, the delayed wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working.

Jul 27, 2014 | 1998 Ford Ranger

3 Answers

1996 ford ranger wipers wont work fuse ok,new wiper motor,new switch, new relays. what else is there?


Do you have int wipers? If so check the int module its under the dash right side of the steering column I believe. Specifically check the solder joints.

Jun 14, 2014 | 1995 Ford Ranger Supercab

2 Answers

Can't find wiper relay on 94 ranger


Wipers do not require a relay. If your wipers are not functioning and a fuse is blown, the washer will not work either. If the washer works, check the wiper switch or the wiper motor, but wiper motors are normally very reliable.

May 17, 2011 | 1994 Ford Ranger Supercab

2 Answers

Need to know location of wiper fuse 2001 ford ranger extended cab 4x4 have no funds to pay for answer. Am disabled and am trying to survive on ssd


In the Passenger compartment fuse panel, located on the left-hand side of the instrument panel facing the driver's side door, check position 16, 30AMP for Windshield Wiper Motor, Wiper Hi-Lo Relay, Wiper Run/Park Relay

Pull the panel cover outward to access the fuses.

zjlimited_982.jpg

Additional details could find in this link to download the Ford Owners Manual

Hope this helps (remember to rate this answer).

Apr 13, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

I have a 2000 ford ranger xlt, windshield wipers and speedometer don't work


wooo hoooo i hate these trucks everything that could go wrong with them does just wait till the fuel shut off switch goes out real fun. but now since im done with my rant im going to say check the fuses and relays.

Nov 29, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Windshield wipers only work on high on 98 ford ranger


Try replacing relay for wiper with another same relay from fuse block from another working accessory.Had same issue on friends Ford Ranger. Moved relays and cleaned harness connection at fuse block. Works fine.

Mar 14, 2010 | 1998 Ford Ranger SuperCab

1 Answer

2002 ford ranger wiper problem replaced wiper motor switch and relays still want work


Check for blown fuses or go outside and turn the wiper on and see if you can hear the wipers trying to move.  The bushings under the wiper arm might be stripped or not properly aligned.  You might have a short somewhere also.  Electrical problems can get expensive.

Oct 30, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

1992 ford ranger wiper wont work wiper pump not working fuse ok?


check wire continuity with multimeter, have had switch go out on ranger as well.

Apr 05, 2009 | 1992 Ford Ranger

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...