Question about 2002 Mercedes-Benz C-Class

Open Question

Injectors i got a mercedes 220 cdi 203 model year2002 and i got a problem it stops and i think its from the injector cause it got p1661 faulty code could it be from the injectors?shall i change them?thanks mine email is

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 260 Answers

SOURCE: break lining wear

that warning is telling you the brake pads are approaching replacement time. have them inpected and will probably need service. i dont think you will lose your brakes, but have checked asap

Posted on Nov 16, 2008

  • 3 Answers

SOURCE: i have a mercedes benz C220 cdi '01 and i wan't to

for the 220cdi,it is a 611.961 motor, you have to refill 6.5 liter,included the olilfilter.Whenyou have refill,and after the motor has running,you can check the oil-level in the board-computer.

Posted on Mar 28, 2009

  • 408 Answers

SOURCE: 2001 Mercedes E220 CDI exhaust black smoke on acceleration

hello,according to service information;smoke formation or si 07.16-p-0004a (service inform) from mb ,your engine have normal function,if you want ,ask your dealer about the service inform with number 07.16-p-0004a,you can read the explanation regarding your problem,ty

Posted on Apr 23, 2009

  • 499 Answers

SOURCE: mercedes 220 cdi 2005 wont go over 3000 revs

well the problem mostly is from
MAF sensor
so try to clean it or change it other wise check the fuel filter and fuel pressure regulator

Posted on Aug 10, 2009

  • 70 Answers

SOURCE: i can not start my mercedes 220 cdi in the cold

Some people add a small amount of carosene like for lanterns durring the cold season, too their fuel 1 qt to 10 gallons give or take.

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a p0202 code on my 2004 saab 93 t2,is that faulty wiring or a faulty injector

It can be either one. Try swapping injectors 2 and 3. Clear the code and run the car. If the code changes to 203, replace the injector. If it stays at 202, check the wiring.

Jan 19, 2018 | Saab Cars & Trucks

1 Answer

ML 320 CDI 2008 Model. Car cuts out while driving, fault code: fuel rail pressure low.

it needs a cat converter to enable the ECM to function properly next low fuel pressure can be from EVAP system not venting the tank properly, failing fuel pump or faulty pressure regulator unloading too much fuel and dropping the pressure
at this point I would be looking at the EVAP system , then the pressure regulator

Nov 06, 2016 | Cars & Trucks

1 Answer

Mercedes Benz sprinter 515 CDI,it just cranking and gives stored fault code on the diagonosing mechine. P008700 Low fuel pressure

Fault codes can be misleading and using a code reader is just one step to reaching a diagnosis, using manual checking of components and sensors and studying live data displayed on a good scanner.

Low fuel pressure could be caused by insufficient fuel being delivered due to a restricted fuel line or faulty pump or equally be caused by faulty injectors and other problems.

Aug 18, 2016 | Cars & Trucks

1 Answer

Injector pump leak

This will almost certainly be the plastic fuel pipes connected to the fuel pump replace both of them this is a common fault the rubber o rings on the pipes harden and leak make sure you prime the diesel filter after replacing these pipes the engine can be difficult to start on this model once air is allowed in the system

Nov 22, 2013 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Have 2005 f-150 5.4l. Reading codes p0203 and p0303. What is it and how hard to fix

Well code 203 is a problem with the injector circuit for cylinder 3, and code 303 is saying cylinder 3 is not producing power.
So the cause of 203 could also cause 303.
I would check the injector and the circuit first.

Sep 25, 2013 | Cars & Trucks

1 Answer

Po 203

P0203 - Injector Circuit Malfunction Cylinder 3
Possible causes- Fuel Injector 3 harness is open or shorted
- Fuel injector 3 circuit poor electrical connection

- Faulty fuel injector
- Faulty Engine Control Module (ECM) When is the code detected?The P0203 is set if the Engine Control Module (ECM) detects a low or high voltage drop or resistance at the number 3 engine cylinder injector.

Aug 16, 2012 | Cars & Trucks

1 Answer

Fuel injectors,ineed tochange fuel injectors,mercedes benz E270cdi

Best Practices
  • Using lower quality gasoline can result in recurring fuel injector problems, even after a fuel injector replacement.

  • Fuel injector seals should always be replaced along with fuel injectors.

Common Symptoms
  • Failing fuel injectors can cause engine misfiring and hesitation. The Check Engine Light may come on and set diagnostic trouble code(s).

Jan 14, 2011 | 2005 Mercedes-Benz E-Class

1 Answer

I own Mercedes e 220 cdi 2003. When I start the car in the morning the rpm of the car goes up and down and the engine das not work probable as it suppose to. After 1 mint when the engine is hot it runs ok....

Black smoke = the air fuel mixture is way too rich, you have a major malfunction in the injection system. The only thing you can do is to replace the sparkplugs and run an injector cleaner additive. Then , if the problem is still there, take the car to a repair shop to have it fully inspected and the faulty part identified and replaced.

Sep 13, 2010 | 2001 Mercedes-Benz E-Class

2 Answers

Can u set the injector timing on a sprinter van using a dial gauge in the no 1 injector at the rear of the pump and if so what are the settings please

hi, yes you can,cant remember exact figure think its 0.9mm, use the bolt above where the spline enters the block to adust the timing by ear-give merc a ring for the exact dial gauge setting as it is different for each engine.

Nov 08, 2009 | 1993 Mercedes-Benz Mercedes Benz 300 Class

Not finding what you are looking for?
2002 Mercedes-Benz C-Class Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77932 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides