Question about 1986 Renault Sport

1 Answer

Philips car radio

Cant get light display on.replaced light display.still not on.have the code but cant enter.because of the display light

Posted by on

1 Answer

How many connector plugs do you have on the back

Posted on Aug 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Radio say SEC? I cant start radio


The sec displayed is security code in case radio is stolen it cant be used without entering the code. Owner may have disconnected battery and didnt put a memory saver in lighter outlet so it locked. If you go to dealer they can retrive the code for you then you enter code and radio should work.unless they changed the factory code. If not and code from dealer works keep in car or safe place so you have it. Usually no charge to do retrival at dealer takes 2 minutes. Hope this helps

Feb 20, 2013 | 1995 Toyota Avalon

1 Answer

Radio wont display "code"


you may have entered the wrong code or not pressed "enter"button after using code.leave to rest overnight then try as it may be in failsafe mode.

Mar 08, 2010 | 2002 Mitsubishi Eclipse

1 Answer

Resetting radio code


You need to be very careful Each failed attempt causes a long delay before you can enter it again. Follow the instructions exactly. You may need to use the car for a day or more before attempting it again if you failed too many times. The radio should say CODE not ERROR. Error means no code can be entered now. You must wait until the radio displays CODE.

Feb 07, 2010 | 2002 Honda Odyssey

1 Answer

Radio is in safe mode and I do not know how to put my code in.


First look @ the documentation of the car to see if you can find the Radio code Its an added sticker usually at the front of the manual you cant miss it!!! It is definatly not printed in the manual as a part of the car. The manuals are universal and it usually is on a separate sticker/sheet/writing.Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Dec 30, 2009 | 2000 Audi A6

2 Answers

How do i enter my renault radio code theres on enter button


If it is a PHILPS radio then try these instructions
=============================================

Philips Renault Code Entry 
 
Turn on the radio and the display will show 'CODE'
 
Use the steering controls for code entry.
 
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
 
If the correct code is now shown on screen, 
press and hold the [ ¬] button for up to 10 seconds to store the code 
===================================

Sep 01, 2009 | 2006 Renault 18I

1 Answer

Entering radio code


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Jun 07, 2009 | 1998 Audi A6

1 Answer

I have the unlock code for my 94 honda accord radio but cant figure out how to enter it


First clear all codes. remove the neg. battery cable for 10 sec. then turn the radio on it will display CODE. Enter the 5 digit numbers using the preset buttons numbered 1 to 6.

Apr 19, 2009 | 1994 Honda Accord

1 Answer

Cant enter my car radiocode ???


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Nov 26, 2008 | 2001 Audi A4

1 Answer

Radio stuck in safe mode


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
PLEASE RATE THIS !!!

Jun 11, 2008 | 2002 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...