Question about 2003 Mitsubishi Galant

1 Answer

I need change the spark plug - 2003 Mitsubishi Galant

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You need a spark plug wrench. available in walmart, kragen, autozone, etc. make sure it is of the correct size. The spark plug connectors in the 4 cyl engine are the two rubber cups and two coils. you will need to unscrew the two coils to access the other 2 spark plugs.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change spark plugs


didnt specify vehicle --generic answer -buy plugs and have information for correct gap need proper spark plug socket--start by removing s/p wire remove s/p replace plug and wire than on to next
How to Change Spark Plugs How to Change Spark Plugs in Car

Oct 26, 2016 | 2009 Hyundai Accent

2 Answers

No spark the engine


how do you know its no spark..

Dec 22, 2013 | 1991 Pontiac Firebird

2 Answers

My spark plugs in my 2004 Mitsubishi Endeavor needs to be changed, and my husband wants to do it himself so is there some way to give me some instructions on how to change spark plugs for my 2004...


YOU NEED LONG SPARK PLUG SOCKET. NEED A 3/8 INCH RATCHET WRENCH.YOU NEED EXTENSION.YOU NEED SPARK GAUGE YOU NEED A TORQUE WRENCH. NOT MANDATORY JUST DONT OVER TIGHTEN SPARK PLUGS STRIP ALUMINUM THREADS WAIT UNTIL ENGINE COOL TO KEEP FROM WARPING THE HEADS. SPARK PLUGS LOCATION ON TOP OF CYLINDER HEADS.TO GET TO SPARK PLUGS THE COILS ON TOP EACH SPARK PLUG.HAS TO BE REMOVED BY REMOVING SMALL SCREW.THAT HOLD COILS DOWN.AND CHANGE ONE SPARK PLUG AT A TIME SO YOU WONT GET THEM MIXED UP.GAP PLUGS AT 0.028 - 0.031

Jan 28, 2011 | Mitsubishi Endeavor Cars & Trucks

1 Answer

Engine missing wont fire properly, i think its the spark plugs how do i change them ?


CHANGE SPARK PLUGS.YOU NEED SPARK PLUG 3/8 SOCKET.YOU NEED SHORT AND LONG 3/8 EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER AND A SPARK PLUG GAUGE SET THE SPARK PLUG GAP.NOW CHANGE 1 SPARK PLUG AT A TIME SO YOU MIX THEM UP GET FIRING ORDER MIX UP CAR BACK FIRE WONT CRANK.ALSO CHANGE PLUG WIRES ALSO.

Nov 10, 2010 | 1994 Honda Civic

2 Answers

Changing spark plugs in 2003 chevy trailblazer


CHANGING SPARK PLUGS IN TRAIL BLAZER. YOU NEED TO REMOVE AIR INTAKE RESONATOR AND IGNITION COILS.YOU NEED LONG 3/8 EXTENSION - SPARK PLUG SOCKET - 3/8 RATCHET WRENCH. NEED SPARK PLUG GAUGE AND A TORQUE WRENCH.YOU CAN GET BY WITH OUT ONE LONG AS YOU DONT OVER TIGHTEN PLUGS AND STRIP OUT ALUMINUM THREADS.

Jun 26, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

How esey is it to change the glow plugs on my ford focus.


CHANGING SPARK PLUGS EASY.ALL YOU NEED IS SPARK PLUG SOCKET.TORQUE WRENCH WOULD BE GOOD.NOT MANDATORY IF YOU MAKE SURE NOT TO OVER TIGHTEN SPARK PLUGS STRIP OUT THREAD SINCE THEY ARE ALUMINUM.YOU NEED A 3/8 RATCHET.SHORT AND LONG EXTENSION.YOU NEED SPARK PLUG GAUGE TO SET SPARK GAP.THE 2.0 OR 2.3 ENGINE SPARK PLUG GAP IS 0.041- 0.045.

May 30, 2010 | 2003 Ford Focus

1 Answer

How to change plugs on honda odyssey 2005


you will need
8mm
10mm
5/8 spark plug socket
3/8 ratchet
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help

May 22, 2010 | 2005 Honda Odyssey

1 Answer

I would like to know how to change the spark


FIRST OF ALL YOU HAVE CHANGE SPARK PLUGS WHEN ENGINE IS COOL.IF YOU CHANGE THEM WHILE ENGINE IS HOT YOU COULD DAMAGE THE ALUMINUM HEADS OR CAUSE DISTORTION.TO CHANGE SPARK PLUGS YOU NEED A SPARK PLUG SOCKET.A TORQUE WRENCH.ITS NOT MANDATORY.BUT IT WILL KEEP YOU FROM OVER TIGHTEN SPARK PLUGS.YOU NEED A 3/8 RATCHET AND EXTENSION.YOU ALSO NEED A SPARK PLUG GAP GAUGE.AND SPARK PLUG BOOT PULLER.YOU ALSO NEED SOME ANTI SEIZE COMPOUND.TO PREVENT DAMAGE THREADS WHEN INSTALLING THE SPARK PLUGS.

Oct 13, 2009 | 1999 Ford Expedition

1 Answer

Need to know where spark plugs are located in order to change


Follow the spark plug wires down into the engine, a soft tug should pull the wire loose from the plug and then you will need a spark plug socket to change them.

May 18, 2009 | 1999 Chevrolet Tracker

Not finding what you are looking for?
2003 Mitsubishi Galant Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...