Question about 2001 Hyundai Accent

2 Answers

How to remove stereo cover to put in a new one unit?

Posted by on

  • Anonymous Nov 28, 2008

    how to remove the radio

  • Anonymous Dec 25, 2008

    want to replace radio in 2004 Hyundai Sonata is there an easy way to do it?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE MOST OF THE DASH COVER REMOVED EXCEPT THE BOTTOM. WHAT NOW?

Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have just purchased a new Pioneer car stero for my 2006 Tiburon. I have just bought this car and we I bought it the face of the radio was missing. How do I remove the old radio from the dash? I cannot find any screws or bolts.

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I've purchased a new double din stereo for my vw sharan 02 reg plugged it in and it's permenantly live any ideas


Check colour coding off old unit plug too new unit plug sounds like acc wire is in wrong position for your model. Put stereos together an check loom from actual deck should have a plug on end make sure both same, if stereo has no plug from it an you plug loom into rear of unit then wrong stereo given an you will need service manual to correct wiring positions.

May 05, 2015 | Cars & Trucks

1 Answer

I need to replace the stero and speakers in my 1993 Subaru legacy, help?


in-dash units require removal of the cosmetic cover before much of anything else..usually the screws are at the sides and bottom of this facing..once removed the front mounting for the radio should be visible..most have bolt flanges on both sides and some have a security bolt in back behind the unit thats hard to remove.requires reaching up and behind the unit to take off. then disconnecting the wires from the unit..and reconnecting whatever youre putting in its place..

Feb 10, 2013 | 1993 Subaru Legacy

1 Answer

How to remove and put the a new radio in a toyota highlander 2002


  • Disconnect the negative battery cable and ensure it doesn't contact any metal parts. Place the transmission into the "Drive" position and set the parking brake.

  • 2

    Remove the trim from around the stereo by prying at one of the bottom corners with your fingers. Apply pressure until the clips disengage and work your way up the trim. Once the trim is free from the dash set it safely aside.

  • 3

    Locate and remove the six 10mm bolts that hold the stereo in place. Pull the head unit out of the Toyota highlander dash and disconnect the wires from the back of the radio.

  • 4

    Connect the wiring harness adaptor to the original harness. Mount the new stereo into the Toyota radio mounting kit and secure it by following the manufacturer's instructions. Plug the wiring harness adaptor and antenna wire into the back of the new stereo.

  • 5

    Slide the entire stereo assembly into the dash and reconnect the battery cable. Turn the radio on and verify the speakers and controls are working on the new stereo. Secure the stereo in the dash with the six 10mm bolts and replace the trim ring around the radio.

  • Dec 07, 2010 | 2003 Toyota Highlander

    1 Answer

    How do i take out my radio from my toyota corrola


    The Toyota Corolla has been around long enough that many owners find themselves needing to replace the factory stereo. Installing a new stereo in the Toyota Corolla gives improved sound and updated features. Swapping out the stereo in the Toyota Corolla takes basic tools and less than an hour. This article covers models from 1990 to 2000.

    Open the hood and remove the negative battery cable from the terminal. Apply the parking brake and place the car in "D."

      > Remove the trim from around the stereo by prying with your fingers at one corner. Some early models have two screws at the top of the trim piece to remove first. Allow the trim to hang on the drivers side of the dash if it's connected to the cigarette lighter.
      > Locate and remove the four screws holding the stereo in place. Pull the radio out of the dash and disconnect the wires from the back of the head unit.
      To install
      > Connect the wiring harness adaptor to the original harness and let it hang from the dash. Slide the new stereo into the Toyota radio mounting kit, which is a thin metal cover and secure it per the manufacturer's instructions. Most adaptors have screws to hold the stereo in place, however some have clips, which engage automatically.
      >Plug the wiring harness adaptor and antenna wire into the back of the new head unit and push the entire assembly into the dash. Reconnect the negative battery cable and turn the radio on.
      > Ensure all of the stereo controls and speakers are working. Secure the radio in the dash with the original four screws and replace the trim.

    Dec 05, 2010 | 1990 Toyota Corolla

    1 Answer

    How to install a new radio in 2004 jeep liberty


    I have a 04 jeep liberty my self and I put in my own stereo. First you take the screw out under the climate controls. Then it's just a matter of slowly but with pressure pulling the (in my case) chrome trim off around the climate control, stereo and empty space where your screw is located. Then the stereo mounted in presently will have a screw at each of the four corners; remove those while holding the stereo in place. Then just un hook your antenna and you're wiring harness from the back and repeat process for the new head unit. For the new wiring harness there may be some wires that need splicing and reconnecting to your new harness.

    Apr 17, 2010 | 2004 Jeep Liberty

    1 Answer

    How do i reinstall the stereo


    The instrument panel cover (and therefore the radio bezel) is fastened to the dash frame with snap-clips which cannot be seen with the instrument panel cover installed. To remove the instrument panel cover and gain access to the radio cavity, remove the radio fuse from fuse panel located on the driver's side of truck (the one that has a thumbnail opening and is triangular shaped), visible when you open the driver's door. Then set parking brake all the way down, put key in ignition and turn to "on" but not "start" and put gearshift into "L" position.
    The snap-clips are located at the upper right corner, lower right corner, upper left corner, lower left corner and a few places in between, behind the dash cover over the instrument panel. You don't need any tools, just put your fingers on the seam of the dash cover and the the dash body, and pull firmly toward you until the instrument panel cover pops out and GENTLY so as not to break the instrument panel cover, continue until the instrument panel cover is loose from the dash and resting on the steering column. The headlight switch, and 4X4 switch (if equipped) remain in the instrument panel cover and will have to be unplugged to remove the instrument panel cover from the dash completely. This is a snug fit, even with the gearshift in "L".
    The aftermarket radio bezel will have two screws at the bottom under the radio on the dash frame. Remove these screws, and remove the aftermarket radio from the radio cavity in the dash. The factory radio has two guide pins on the back, and the electrical connector is made into the radio and again in the back of the radio cavity. Simply slide the factory unit into the radio cavity, firmly seat it into the connector and guide pin sockets, and re-install the two screws you took out earlier.
    The instrument panel cover re-installs the reverse of removal, and to seat the snap-clips, simply strike the cover sharply with the heel of your hand over each clip location. The dash will pop right back into place, and you will never know that an aftermarket head unit had ever been in there.

    Feb 14, 2010 | 1997 Chevrolet Tahoe

    2 Answers

    How to remove 2001 hyndai sonata audio system


    Instructions
    Things You'll Need:
    • Screwdrivers
    • Wiring harness adaptor
    • Hyundai radio adaptor kit
    1. Open the coin holder and remove the two screws at the front. Pry the trim from around the gearshift lever and unhook the power wire to the cigarette lighter.
    2. Locate and remove the two screws from the bottom of the radio trim panel. Look for the screws, attached to a rod, below the glove box. Unhook the cable from the rod and pull the rod free.
    3. Place the shifter into "D" and slide the radio trim panel away from the dash. Locate the four screws at the front and sides of the stereo and remove them.
    4. Pull the stereo out of the Hyundai Sonata dash and disconnect the wires from the back of the unit. Connect the wiring harness adaptor to the original harness.
    5. Slide the new head unit into the Hyundai radio adaptor kit. Attach the wiring harness adaptor and antenna wire to the back of the new head unit and push the entire assembly into the dash.
    6. Secure the stereo in place with the four front and side screws and turn it on. Verify all of the speakers and features are working. Reattach the radio trim panel, insert the rod back into cable assembly and secure the trim around the gear shift.

    In here you can find tips about remove radio...
    - Hyundai Car Stereo removal
    - Stereo Removal Hyundai (buy)

    I really hope help you with this (remember rated this help). Good luck.

    Oct 01, 2009 | 2001 Hyundai Sonata

    1 Answer

    Radio needs a code but i dont know it


    It sounds like you stereo did not retain it's memory during the battery change. Unless you have the code, or the serial number written down somewhere, you will have to remove the stereo and get the serial number off the unit to request a new one.

    Aug 17, 2009 | 1996 Honda Accord

    1 Answer

    Removing the car radio out the car http://www.fixya.com/cars/p694322-pontiac_1999_sunfire/solutions


    Very simple on a Sunfire. Open glove compartment and remove the 2 phillips screws holding the cover. Remove cover. There will be 3 7MM screws hollding in the stereo. Remove them pull out and unplug antenna and power. You are out. A 5 minute or less job.
    The same stereo can be returned to the same car any time. if you put in another one you may need to unlock at a dealership.
    To test another one plug the new one in and put car on accessory. It will work and play in your car. If all is well and you know it is good you can install. If when you turn the ignition to ON and if it locks then all you need to do is have the dealer unlock and you are good to go.
    At least you will know all is well before you unlock.

    Jun 11, 2009 | 1999 Pontiac Sunfire

    1 Answer

    Removal of 57 plate x type jaguar car stereo


    unclip plastic surround from gear stick, then remove ash tray - i know i didnt think it sounded right either...carry on...remove plastic cover now thats hiding 2 torx screws, remove them.
    at the top of the unit near the hazards, that little section pops off to reveal 2 more torx 60? screws, remove them, and it will just pop out.  the unit looks like it could just slot the stereo part out but you cant.

    Sep 02, 2008 | 2002 Jaguar X-Type

    Not finding what you are looking for?
    2001 Hyundai Accent Logo

    Related Topics:

    355 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6878 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...