Question about Mazda MAZDA6

Open Question

Changing mazda 6 headlights - MAZDA6 Mazda Cars & Trucks

Posted by on

5 Suggested Answers

ASEtech
  • 67 Answers

SOURCE: mazda 6 2.3 sport 2002 headlights

If your car and headlights are off then you will not get a shock. You have to unplug the bulb to replace it anyway so there is no way for you to get shocked.

Posted on Dec 03, 2008

scott586
  • 41 Answers

SOURCE: need to change headlight on 2003 mazda rx 6

If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.

Posted on Apr 22, 2009

  • 1 Answer

SOURCE: Changing the bulb for a headlight

I guess you refer to the dipped beam headlamp?
If the light is a normal one, not the fancy expensive bright lamp, bluish colour light emitted you should be able to reach it throgh the wheelarch after removing part of the plastic trim.
The cover rotates and can be easily removed.
The there is the usual wire spring loop that hold the lamp in.
The lamp in mine was a standard H1 single filament bulb.
Took about 20 minutes to replace in semi darkness with the aid of a wind-up torch!

Hope this helps.

Paul H.

Posted on May 07, 2009

  • 1986 Answers

SOURCE: 05 Mazda 6 I need to replace the headlights

Behind the head lamp you'll see a circular cap with some fins on it. Turn it counter clockwise and then it should come out exposing the back of the bulb. Then you will need to push in and up on an angle to release the metal spring clip that holds the bulb in place. Then you can disconnect the harness to the back of the bulb and then remove the bulb. Do not touch the glass of the bulb when putting in the new one as that will cause the bulb to catastrophically fail

Posted on Oct 28, 2009

SOURCE: 2005 Mazda 6 headlights keep going out

I'm having the same problem. Did you find a fix? -luck160@hotmail.com

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How fix 2006 Mazda 6 headlights


what is wrong with the headlights on this 2006 Mazda 6 i

Apr 22, 2012 | 2006 Mazda 6 i

2 Answers

2005 Mazda 6 headlights keep going out


leaking headlamp lense or over voltage from the alternator

Jan 22, 2010 | 2005 Mazda 6

1 Answer

How do i adjust the headlights on a 2003 mazda 6 ?


there are upper and lower bolts that attach the headlights to the front of the car, simply by loosing or tightening either ones will change the angle in which they shine.

Nov 06, 2009 | 2003 Mazda Mazda6

2 Answers

Need to change headlight on 2003 mazda rx 6


If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.

Apr 22, 2009 | 1994 Mazda MX-6

1 Answer

Mazda 6 2.3 sport 2002 headlights


If your car and headlights are off then you will not get a shock. You have to unplug the bulb to replace it anyway so there is no way for you to get shocked.

Dec 03, 2008 | 2003 Mazda Mazda6

1 Answer

My Mazda 6 sport has xenon discharge headlights. One of them keeps going off while driving. I can't find any loose connections, and the Mazda dealer couldn't reproduce the problem. Any advice?


I had the same Problem on My Mazda 6 Sport. If you turn the lights off then back on the light comes back on.The main dealer eventually changed the headlight, after being instructed by Mazda that there was a common fault within the sealed unit.
My advise is to take it back to the dealer, and tell them mazda have nbeen changing them under warranty.

Aug 13, 2008 | Mazda MAZDA6 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...