Question about 1992 Plymouth Grand Voyager

1 Answer

Horn problem horn don't work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Im not a car expert. check wireing does it have a fuse?? I have no idea, im in computers not in cars, ask someone else.

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horns not working,original relay 43yrs old !


You hear clicking at horns, and not the relay? Maybe the horns went bad, or maybe you need to check and clean the connections there.
Don\'t know why the cab light went dim, unless the horn wire was trying to make contact?
Yes, TJ, the horn wire should be hot. You are grounding that hot wire when you press for the horn. That hot wire comes from the coil side of the horn relay. Press for horn, it grounds the coil side of relay, and the relay can pass power to the horns.
Now back to the clicking no-honker horns: power gets to the horns when relay is energized, and there has to be a good ground for horns to work. I don\'t know if your horns are case grounded or a wire from horns goes to ground, but check the ground there. If case grounded, pull horns off and clean the ground. Also might try a known good horn. Keep at it, sounds like you are almost there.

Dec 30, 2012 | Cars & Trucks

1 Answer

Is there a horn relay in a 96 v6 mazda 323


Yes,you have a horn relay,I will send you acouple of links,one,where it's at and what it looks like.

Sep 04, 2012 | 1994 Mazda 323

1 Answer

Horn don't work


could be a fuse, a dead horn, or a problem with the horn pad on the steering wheel

Jun 30, 2012 | 1999 Dodge Caravan

1 Answer

Horns don't work when power put to them with a


If you did apply power directly to the horn and they don't repsond or just "buzz" then you need new horns.

Jan 27, 2012 | 1991 Mercedes-Benz Mercedes Benz 500 Class

1 Answer

My question on my 94 toyota pickup 2wd; how can I check to see if the horn contacts are making contact? since the horn contacts are located under the steering wheel, and the air bag is also located there,...


disconnect the negative batery terminal be fore you mess with the horn. the cover should come off easily and you will the wire for the horn on my car the wire is green

Sep 21, 2011 | Toyota Pickup Cars & Trucks

1 Answer

Touran horn not working changed both but still no joy


A horn circuit first must have power so check your fuse. Then it goes through the horn switch (on the steering column) then through the horn relay and then to the horn itself.

If you changed the horns did you check to find out IF the horns were getting DC voltage to them first? If you don't, then it is either the switch or the relay.

Jul 01, 2011 | Volkswagen Routan Cars & Trucks

1 Answer

Horn dont work need location of horn relay fuse fuse for horn


I don't see a fuse for the horn but I can tell you the horn relay is located in the power distribution box located under the hood of the car in the engine compartment on the drivers side of the vehicle. Below is a diagram of the fuse layout. The horn relay is the one marked "R6". This should be in your owners manual if you have one. If you don't and would like a copy, you can email me at csautomotivecars@att.net with your make, model and year and I will be happy to email you a copy. No worries, no cost for it. I hope this helps and good luck.


clifford224_942.gif

Jun 29, 2011 | 1999 Mercury Cougar

1 Answer

My cruise control doesn't work??...any


jnjkingbird, It sounds like this problem is the clock spring as I don't believe that the horn and the cruise control would share a fuse. However, they do share a circuit in the clock-spring. You can check for power at each unit (horn and the cruise control) which would confirm this. Check each fuse as well. Good luck with this.

May 29, 2011 | 2002 Lincoln LS

1 Answer

Push on wheel no horn sound, fuse okay


when pushing on the horn pad do you hear a click noise if so then the horn relay is good and the horn itself is probably the problem.if not it could be the relay but these don`t go bad very often.i would check the horn by feeding power to it directly at the horn to see if it works.

May 01, 2011 | 1997 GMC Jimmy

Not finding what you are looking for?
1992 Plymouth Grand Voyager Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...