Question about 2004 Honda Accord
Car smells of oil when A/C is on.
Try changing your cabin air filter. Open up the glove box and it is behind it.
Posted on Jul 23, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 honda accord
It's for the 'vehicle stability assist' system.(aka electronic stability control) This lights up if you have turned the vsa system off. If it flashes, it means the system is on and operating to help control the stability of your car (making adjustments in engine and braking). If it comes on w/ VSA indicator light at the same time, it indicates you have a problem w/ the system. Sorry u didn't get the manual, it's amazing how many people throw them out! countrycurt0
Posted on Aug 22, 2008
Honda's are drain and refill only.The filter is internal inside the transmission and can only be accessed during an overhaul.On the bottom of the transmission case is a drain plug that is gold in color.It is removed using a 3/8" ratchet,or extension with a ratchet atached.There is also an aluminum washer that must be kept track of and reinstalled with the drain plug or a leak will occur.After draining the trans,and reinstalling the drain plug,Honda genuine automatic transmission fluid,or an equivalent with a highly fricition modified additive must be used,or harsh shifting can occur.I would install about 3 quarts after draining,and start checking the level at this point.The fluid level is checked with the engine OFF,on level ground.
Posted on Nov 27, 2008
Try 'jiggling' the key while you hold it in the start position' this could be a failed ignition switch.
It could also be that the + terminal on the starter or starter solenoid may be corroded. Since the battery was just replaced, those terminals are probably clean enough but check the negative cable where it attaches to the chassis or block. If the connection is flaky here, enough current can often pass to allow lower current devices to operate but drop too much voltage if the starter is trying to operate. Starters require 100-200 amperes, many times higher than anything else in our vehicles and show up cruddy connections pretty quick.
Posted on Nov 21, 2009
Tips for a great answer:
Dec 06, 2014 | 2004 Honda Accord
Jul 21, 2014 | 2005 Honda Accord
Dec 05, 2013 | 1989 Honda Accord 4 Door
Mar 01, 2013 | 1995 Honda Accord
Sep 02, 2011 | 2004 Kia Optima
Aug 17, 2010 | 2004 Honda Accord
Aug 05, 2010 | 2004 Honda Accord
Apr 08, 2010 | 2004 Honda Accord
127 people viewed this question
Usually answered in minutes!