Question about 1997 Jeep Cherokee Country

1 Answer

Coolant leak - 1997 Jeep Cherokee Country

Posted by on

  • Anonymous Jul 29, 2008

    i have coolent coming from, what looks like the oil pan infront of the motor, by the main pully

  • Anonymous Oct 08, 2008

    coolant leak under intake manifold where it bolts to the block.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem but still no answer i will try to find one and comment you back.

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On a 95 Pontiac grad am. Coolant leaking from middle of engine.


Coolant Leak Diagnosis - RepairPal

repairpal.com/coolant-leak-diagnosis
Is the coolant leak under neath a particular area of the engine?4. ... A Coolant LeakDiagnosis involves special cooling system pressure testing tools, ... coolant leaks frommiddle of motor under car and seem to overheat,already replaced ...

Sep 25, 2015 | Pontiac Cars & Trucks

2 Answers

Antifreeze is leaking from the radiator? hit something, the honeycomb grill at the bottom pushed a small tube into what looks like the bottom of the radiator. Coolant is leaking. The tube looks like p


Get the coolant pressure tested, its definitely leaking coolant. You will need to get the coolant running line.


Pressure test will help you to know from where exactly coolant/refrigerant is getting leaked.

===========

For complete step by step troubleshooting i suggest you to go through the help link mentioned below :----
Click the link below: -----

COOLANT LEAK ISSUES, COOLANT LEAK PROBLEMS, COOLANT SENSOR, LOW COOLANT,
http://alltypesofpartsreplacing.blogspot.com/2012/12/coolant-leak-issues-coolant-leak.html

=========
These will help.
Thanks.

Dec 25, 2012 | 2008 Land Rover LR2

1 Answer

Gs300 coolant is bubbling in resevoir,but temp is fine ?


Get coolant temp sensor checked.

Get the coolant pressure tested, its definitely leaking coolant. You will need to get the coolant running line.


Pressure test will help you to know from where exactly coolant/refrigerant is getting leaked.

===========

For complete step by step troubleshooting i suggest you to go through the help links mentioned below :----

Click the link below :-----


Coolant enters in transmission on Toyota Land cruiser?

http://schematicsdiagram.blogspot.com/2012/01/coolant-enters-in-transmission-on.html

--------------

1991 Toyota Camry: Order Coolant Bypass Tube?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-camry-order-coolant-bypass.html

-------------

2002 Toyota Camry: Puff of Blue or White Smoke while Starting?

http://whatisbyme.blogspot.in/2012/05/2002-toyota-camry-puff-of-blue-or-white.html

----------------

1994 Toyota Camry: Coolant Leak?

http://technoanswers.blogspot.in/2012/04/1994-toyota-camry-coolant-leak.html

----------

2006 Cadillac DTS: COOLANT LEAK AT DRIVER SIDE NEAR FIREWALL?

http://schematicsdiagram.blogspot.in/2012/04/2006-cadillac-dts-coolant-leak-at.html

----------

MAF, IAT, MAP and Coolant Level Sensor problem all together on Mazda MPV?

http://schematicsdiagram.blogspot.com/2011/12/maf-iat-map-and-coolant-level-sensor.html

---------------

GMC Engine Coolant Temperature (ECT) Sensor Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-engine-coolant-temperature-ect.html

------------

Loosing Coolant?

http://whoisbyme.blogspot.in/2012/06/loosing-coolant.html

---------------

Coolant temperature sensor dies again and again?

http://schematicsdiagram.blogspot.com/2012/01/coolant-temperature-sensor-dies-again.html

------------

2000 Daewoo Lanos: Where to Add Coolant?

http://repairhelpcenter.blogspot.in/2012/06/2000-daewoo-lanos-where-to-add-coolant.html

Blue Water Warning Light on Dash?

http://whatisbyme.blogspot.in/2012/07/blue-water-warning-light-on-dash.html

---------------

Replacing Oldsmobile Engine coolant sensor?

--------------

How to test Engine coolant temperature sensor?

------------------

Replace Coolant Sensor Module on Oldsmobile?

-----------

These details will help.

Thanks.

Nov 28, 2012 | 1994 Lexus GS 300

1 Answer

Will a leak cause the radiator fan relay curcuit to malfunction on a 2003 jeep liberty 3.7


a leak in coolant system will cause air pocket in the coolant system around the engine coolant temperature sensor.coolant sensor is a thermistor in which when hot cool cause it resistance decrease which affect the voltage from sensor to pcm which will cause engine coolant to turn on.if coolant level okay,check coolant fan fuse and relay, if all is good,engine coolant temperature sensor could be bad or have vechicle code scan for pcm problems it control the coolant fan.fill coolant system to correct level make sure engine coolat reservoir is at full cold mark and not empty.fill coolant system check for leaks,refill coolant overflow jug back to full cold mark dont over fill, if coolant overflow stay empty you have leak either its leaking or you have radiator hoses or radiator leaking coolant.when coolant overflow jug run dry it cause air get in coolant system causing overheating problems.

Jul 25, 2012 | 2003 Jeep Liberty

2 Answers

My coolant is rapidly disappearing, and I have no clue why?


IF YOU GOT TOO MUCH WATER IN COOLANT SYSTEM AND DONT HAVE 50 / 50 MIXTURE OF ANTIFREEZE AND WATER. WATER WILL EVAPORATE BOIL AWAY.CHECK FOR COOLANT LEAKS LOOK AT TOP AND BOTTOM RADIATOR HOSES LEAKS, CHECK FOR COOLANT LEAKS AROUND BOTH RADIATOR CONTAINER AND RADIATOR CORES LEAKING. CHECK WATER PUMP WEEP HOLE. IF LEAKING WATER NEED REPLACING, CHECK ENGINE CRANKCASE ANTIFREEZE WILL LEAK IN CRANK CASE OR LEAK IN THE INTAKE GASKET COOLANT WILL BURN WITH FUEL.MANY THINGS WILL CAUSE COOLANT LOST.

Aug 12, 2011 | 2003 Ford Explorer

1 Answer

IT KEEPS OVERHEATING


REPLACE THE THERMOSTAT AND RADIATOR PRESSURE CAP.IF COOLANT LOW, ADD MORE COOLANT THROUGH COOLANT OVERFLOW UNTIL COOLANT LEVEL IN THE COOLANT OVERFLOW STAY AT FULL COLD MARK.REASON POUR COOLANT THROUGH COOLANT OVERFLOW MOST GM CARS DONT HAVE RADIATOR CAP.WHEN YOU GET COOLANT LEVEL OKAY, CRANK CAR LET IT IDLE UNTIL ENGINE GET HOT BUILD UP PRESSURE THEN TURN OFF CAR.CHECK FOR COOLANTS LEAKS AT THE RADIATOR HOSES,CHECK FOR LEAKS AT THE RADIATOR, CHECK FOR LEAKS AT WATER PUMP WEEP HOLE IF YOU SEE COOLANT LEAKING FROM WEEP HOLE REPLACE WATER PUMP. IF CAR OVERHEATING WHILE IDLING YOUR COOLING FANS NOT WORKING CHECK COOLING FANS FUSE AND RELAYS.IF FUSE AND RELAYS OKAY THE ENGINECOOLANT TEMPERATURE SENSOR BAD.

Aug 01, 2011 | 1994 Cadillac DeVille

2 Answers

Coolant leaked out; how do i repair?


TO FIX COOLANT LEAK.YOU HAVE TO LOCATE IT.BEST TIME FIND COOLANT LEAK WAIT UNTIL MORNING.ADD COOLANT UNTIL COOLANT LEVEL IN RADIATOR CORRECT. START THE ENGINE LET IDLE UNTIL START GETTING HOT.THEN TURN OFF ENGINE.COOLANT PRESSURE WILL PUSH COOLANT OUT WHERE LEAKS ARE.CHECK TOP RADIATOR HOSE AND BOTTOM RADIATOR HOSE.CHECK AROUND RADIATOR LOOK DOWN BELOW COOLANT FAN AREA BEHIND RADIATOR.LOOK FOR LEAKS AT RADIATOR CORES AND SIDE CONTAINERS.CHECK FOR COOLANT LEAKS AROUND WATER PUMP GASKET OR WEEP HOLE.CHECK FOR COOLANT LEAKS AROUND HEATER HOSES AND HEATER CORE.CHECK ENGINE CRANKCASE FOR COOLANT LEAKS.

Dec 13, 2010 | 2001 BMW 325

4 Answers

Loosing coolant no visible leaks about 1/2 gallon every 100 miles


How To Find & Fix Coolant Leaks

861e67b.gif

WHERE COOLANT LEAKS OCCUR
Coolant leaks can occur anywhere in the cooling system. Nine out of ten times, coolant leaks are easy to find because the coolant can be seen dripping, spraying, seeping or bubbling from the leaky component. Open the hood and visually inspect the engine and cooling system for any sign of liquid leaking from the engine, radiator or hoses. The color of the coolant may be green, orange or yellow depending on the type of antifreeze in the system. The most common places where coolant may be leaking are:
Water pump -- A bad shaft seal will allow coolant to dribble out of the vent hole just under the water pump pulley shaft. If the water pump is a two-piece unit with a backing plate, the gasket between the housing and back cover may be leaking. The gasket or o-ring that seals the pump to the engine front cover on cover-mounted water pumps can also leak coolant. Look for stains, discoloration or liquid coolant on the outside of the water pump or engine.

Radiator -- Radiators can develop leaks around upper or loser hose connections as a result of vibration. The seams where the core is mated to the end tanks is another place where leaks frequently develop, especially on aluminum radiators with plastic end tanks. On copper/brass radiators, leaks typically occur where the cooling tubes in the core are connected or soldered to the core headers. The core itself is also vulnerable to stone damage. Internal corrosion caused by old coolant that has never been changed can also eat through the metal in the radiator, causing it to leak.

Most cooling systems today are designed to operate at 8 to 14 psi. If the radiator can't hold pressure, your engine will overheat and lose coolant.

Hoses -- Cracks, pinholes or splits in a radiator hose or heater hose will leak coolant. A hose leak will usually send a stream of hot coolant spraying out of the hose. A corroded hose connection or a loose or damaged hose clamp may also allow coolant to leak from the end of a hose. Sometimes the leak may only occur once the hose gets hot and the pinhole or crack opens up.

Freeze plugs -- These are the casting plugs or expansion plugs in the sides of the engine block and/or cylinder head. The flat steel plugs corroded from the inside out, and may develop leaks that are hard to see because of the plug's location behind the exhaust manifold, engine mount or other engine accessories. On V6 and V8 blocks, the plugs are most easily inspected from underneath the vehicle.

Heater Core -- The heater core is located inside the heating ventilation and air conditioning (HVAC) unit under the dash. It is out of sight so you cannot see a leak directly. But if the heater core is leaking (or a hose connection to the heater core is leaking), coolant will be seeping out of the bottom of the HVAC unit and dripping on the floor inside the passenger compartment. Look for stains or wet spots on the bottom of the plastic HVAC case, or on the passenger side floor.

Intake Manifold gasket -- The gasket that seals the intake manifold to the cylinder heads may leak and allow coolant to enter the intake port, crankcase or dribble down the outside of the engine. Some engines such as General Motors 3.1L and 3.4L V6 engines as well as 4.3L, 5.0L and 5.7L V8s are notorious for leaky intake manifold gaskets. The intake manifold gaskets on these engines are plastic and often fail at 50,000 to 80,000 miles. Other troublesome applications include the intake manifold gaskets on Buick 3800 V6 and Ford 4.0L V6 engines.

INTERNAL COOLANT LEAKS
There are the worst kind of coolant leaks for two reasons. One is that they are impossible to see because they are hidden inside the engine. The other is that internal coolant leaks can be very expensive to repair.

Bad head gasket --Internal coolant leaks are most often due to a bad head gasket. The head gasket may leak coolant into a cylinder, or into the crankcase. Coolant leaks into the crankcase dilute the oil and can damage the bearings in your engine. A head gasket leaking coolant into a cylinder can foul the spark plug, and create a lot of white smoke in the exhaust. Adding sealer to the cooling system may plug the leak if it is not too bad, but eventually the head gasket will have to be replaced.

If you suspect a head gasket leak, have the cooling system pressure tested. If it fails to hold pressure, there is an internal leak. A "block tester" can also be used to diagnose a leaky head gasket. This device draws air from the cooling system into a chamber that contains a special blue colored leak detection liquid. Combustion gases will react with the liquid and cause it to change color from blue to green if the head gasket is leaking.

Head gasket failures are often the result of engine overheating (which may have occurred because of a coolant leak elsewhere in the cooling system, a bad thermostat, or an electric cooling fan not working). When the engine overheats, thermal expansion can crush and damage portions of the head gasket. This damaged areas may then start to leak combustion pressure and/or coolant.

Cracked Head or Block -- Internal coolant leaks can also occur if the cylinder head or engine block has a crack in a cooling jacket. A combustion chamber leak in the cylinder head or block will leak coolant into the cylinder. This dilutes the oil on the cylinder walls and can damage the piston and rings. If the coolant contains silicates (conventional green antifreeze), it can also foul the oxygen sensor and catalytic converter. If enough coolant leaks into the cylinder (as when the engine is sitting overnight), it may even hydro-lock the engine and prevent it from cranking when you try to start it. Internal leaks such as these can be diagnosed by pressure testing the cooling system or using a block checker.

A coolant leak into the crankcase is also bad news because it can damage the bearings. Coolant leaking into the crankcase will make the oil level on the dipstick appear to be higher than normal. The oil may also appear frothy, muddy or discolored because of the coolant contamination.

Leaky ATF oil cooler -- Internal coolant leakage can also occur in the automatic transmission fluid oil cooler inside the radiator. On most vehicles with automatic transmissions, ATF is routed through an oil cooler inside the radiator. If the tubing leaks, coolant can enter the transmission lines, contaminate the fluid and ruin the transmission. Red or brown drops of oil in the coolant would be a symptom of such a leak. Because the oil cooler is inside the radiator, the radiator must be replaced to eliminate the problem. The transmission fluid should also be changed.

continue...

Mar 12, 2010 | 1998 Oldsmobile 88

1 Answer

Loosing antifreeze


f735a20.gif

WHERE COOLANT LEAKS OCCUR
Coolant leaks can occur anywhere in the cooling system. Nine out of ten times, coolant leaks are easy to find because the coolant can be seen dripping, spraying, seeping or bubbling from the leaky component. Open the hood and visually inspect the engine and cooling system for any sign of liquid leaking from the engine, radiator or hoses. The color of the coolant may be green, orange or yellow depending on the type of antifreeze in the system. The most common places where coolant may be leaking are:
Water pump -- A bad shaft seal will allow coolant to dribble out of the vent hole just under the water pump pulley shaft. If the water pump is a two-piece unit with a backing plate, the gasket between the housing and back cover may be leaking. The gasket or o-ring that seals the pump to the engine front cover on cover-mounted water pumps can also leak coolant. Look for stains, discoloration or liquid coolant on the outside of the water pump or engine.

Radiator -- Radiators can develop leaks around upper or loser hose connections as a result of vibration. The seams where the core is mated to the end tanks is another place where leaks frequently develop, especially on aluminum radiators with plastic end tanks. On copper/brass radiators, leaks typically occur where the cooling tubes in the core are connected or soldered to the core headers. The core itself is also vulnerable to stone damage. Internal corrosion caused by old coolant that has never been changed can also eat through the metal in the radiator, causing it to leak.

Most cooling systems today are designed to operate at 8 to 14 psi. If the radiator can't hold pressure, your engine will overheat and lose coolant.

Hoses -- Cracks, pinholes or splits in a radiator hose or heater hose will leak coolant. A hose leak will usually send a stream of hot coolant spraying out of the hose. A corroded hose connection or a loose or damaged hose clamp may also allow coolant to leak from the end of a hose. Sometimes the leak may only occur once the hose gets hot and the pinhole or crack opens up.

Freeze plugs -- These are the casting plugs or expansion plugs in the sides of the engine block and/or cylinder head. The flat steel plugs corroded from the inside out, and may develop leaks that are hard to see because of the plug's location behind the exhaust manifold, engine mount or other engine accessories. On V6 and V8 blocks, the plugs are most easily inspected from underneath the vehicle.

Heater Core -- The heater core is located inside the heating ventilation and air conditioning (HVAC) unit under the dash. It is out of sight so you cannot see a leak directly. But if the heater core is leaking (or a hose connection to the heater core is leaking), coolant will be seeping out of the bottom of the HVAC unit and dripping on the floor inside the passenger compartment. Look for stains or wet spots on the bottom of the plastic HVAC case, or on the passenger side floor.

Intake Manifold gasket -- The gasket that seals the intake manifold to the cylinder heads may leak and allow coolant to enter the intake port, crankcase or dribble down the outside of the engine. Some engines such as General Motors 3.1L and 3.4L V6 engines as well as 4.3L, 5.0L and 5.7L V8s are notorious for leaky intake manifold gaskets. The intake manifold gaskets on these engines are plastic and often fail at 50,000 to 80,000 miles. Other troublesome applications include the intake manifold gaskets on Buick 3800 V6 and Ford 4.0L V6 engines.

INTERNAL COOLANT LEAKS
There are the worst kind of coolant leaks for two reasons. One is that they are impossible to see because they are hidden inside the engine. The other is that internal coolant leaks can be very expensive to repair.

Bad head gasket --Internal coolant leaks are most often due to a bad head gasket. The head gasket may leak coolant into a cylinder, or into the crankcase. Coolant leaks into the crankcase dilute the oil and can damage the bearings in your engine. A head gasket leaking coolant into a cylinder can foul the spark plug, and create a lot of white smoke in the exhaust. Adding sealer to the cooling system may plug the leak if it is not too bad, but eventually the head gasket will have to be replaced.

If you suspect a head gasket leak, have the cooling system pressure tested. If it fails to hold pressure, there is an internal leak. A "block tester" can also be used to diagnose a leaky head gasket. This device draws air from the cooling system into a chamber that contains a special blue colored leak detection liquid. Combustion gases will react with the liquid and cause it to change color from blue to green if the head gasket is leaking.

Head gasket failures are often the result of engine overheating (which may have occurred because of a coolant leak elsewhere in the cooling system, a bad thermostat, or an electric cooling fan not working). When the engine overheats, thermal expansion can crush and damage portions of the head gasket. This damaged areas may then start to leak combustion pressure and/or coolant.

Cracked Head or Block -- Internal coolant leaks can also occur if the cylinder head or engine block has a crack in a cooling jacket. A combustion chamber leak in the cylinder head or block will leak coolant into the cylinder. This dilutes the oil on the cylinder walls and can damage the piston and rings. If the coolant contains silicates (conventional green antifreeze), it can also foul the oxygen sensor and catalytic converter. If enough coolant leaks into the cylinder (as when the engine is sitting overnight), it may even hydro-lock the engine and prevent it from cranking when you try to start it. Internal leaks such as these can be diagnosed by pressure testing the cooling system or using a block checker.

A coolant leak into the crankcase is also bad news because it can damage the bearings. Coolant leaking into the crankcase will make the oil level on the dipstick appear to be higher than normal. The oil may also appear frothy, muddy or discolored because of the coolant contamination.

Leaky ATF oil cooler -- Internal coolant leakage can also occur in the automatic transmission fluid oil cooler inside the radiator. On most vehicles with automatic transmissions, ATF is routed through an oil cooler inside the radiator. If the tubing leaks, coolant can enter the transmission lines, contaminate the fluid and ruin the transmission. Red or brown drops of oil in the coolant would be a symptom of such a leak. Because the oil cooler is inside the radiator, the radiator must be replaced to eliminate the problem. The transmission fluid should also be changed.

continue..

Mar 12, 2010 | 2007 Hummer H3X

1 Answer

2002 freelander coolant leak


My coolant leaked out and on top there is a large hard plastic container, I had to replace it, that stopped my coolant leak.

Sep 26, 2008 | 2002 Land Rover Freelander

Not finding what you are looking for?
1997 Jeep Cherokee Country Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...