Question about 1998 Saturn SL

2 Answers

Turning lights will not work

None of the flasher lights flash when you move the lever up or down. The light bulbs seem to work in the front, in the back, I am not sure because I am not sure which bulb they are.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Flasher for the signals are located beside your right leg on the driver side in the panel. it's black and square 3 prongs on it.

Posted on May 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check the flsher unit relay in center console where the fuses are

Posted on Jul 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My right turn signal wont turn off on the dashboard and makes a beeping nose. When i use it it flashes really fast just on the dash though


Normally when ur flasher flash faster only on one side it indicates that u have a light out on that on side could be in front or back turning light

Mar 12, 2015 | Cars & Trucks

1 Answer

When I turn on lights, the turn signal lights also on at the right side and turen signal doesn't act flash


Turn the parking light and compare the brightness on all lights. Next turn the flasher and compare the brightness on all light. Some time light bulb like 1157 will be insert the wrong way and short the light to signal. second open the light socket remove the bulb and inspect for burn mark and rust(replace the socket.
Behind the carpet is the ground point, clean and tight the ground.
and last is the combination switch for light and signals.
Good Luck

Jan 17, 2015 | 2000 Toyota Sienna

1 Answer

Both fron turn signal flash when selecting a right or left turn, but rear lights work fine.


check the elements in the light bulbs sometimes they short together

Aug 23, 2012 | 1999 Chevrolet Lumina

1 Answer

Were is the flasher for left rear light


There is one flasher that controls all 4 turn signals. If only one light is not flashing the flasher relay is not the problem. If the flasher relay is bad none of them will flash. Check the bulb. The Turn signal flasher relay is located front seating area. It is integral to the hazard switch located in the center of the instrument panel, just above the radio. Curtorsey: Auto Zone

May 18, 2010 | 2002 Jeep Liberty

2 Answers

I have turnsignals problem on 92 buick lasabre limited i replaced flasher, all bulbs are good. if i manually move the turnsignal lever up and down the bulbs will flash also hazard lights work what else can...


When you say you replaced "flasher" I'm guessing you mean the combination turn signal flasher unit. If the hazards "flash" on the 4 way but the turn signal does not you are looking at a turn signal switch type problem. ... If 4way flashers do NOT work you need to check wiring immediately around the flasher unit mounting area.Or change Flasher unit Good Luck.

Apr 11, 2010 | 2000 Buick LeSabre

1 Answer

Flashers, turn signals and brake lights


Try shaking the turn signal lever rapidly. Not to the point of breaking it but you do want to apply a little extra pressure. move it in every direction for about 5 to 10 minutes. do not spray anything into the switch as it will collect dust and dirt in the future. This should get everything freed up and working in the multifunction switch. That sounds like where the problem is coming from.

Jul 03, 2009 | 1998 Jeep Wrangler

3 Answers

Signal lights work intermittently


For an intermittant problem I'd recommend removing the flasher unit -- it is plugged into a socket, so you can just pull it out.

Clean the contact pins on the flasher and replace it in the socket.

That should do the trick.

May 27, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Signal Lights - flasher...


Hi it sounds like the multifuntion switch
never had one on a monte carlo before but lots of grand am and malibu
hope this helps

Mar 23, 2009 | 2002 Chevrolet Monte Carlo

1 Answer

Brake light and flasher


check and test the socket ( pig tail ) that the lite plus int for power when the flasher is on. If there is power to it try a different bulb, if there is no power then you will need to trace the wiring circuit back towards the fuse box testing for power at all junctions. Good luck, and remember to rate all solutions you get. Thanx

Oct 28, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
1998 Saturn SL Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...