a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Could be that the catalytic converter is stopped up or the timing belt or chain needs to be replaced. When is the last time it was tuned up? May need plugs wire etc. Fuel pump may also be going out get a pressure gauge or have it checked for fuel pressure
i have 95 isuzu rodeo with the 3.2l my fuel filter is good i can hear my pump turn on i know there is fuel in the rail but i dont know if there is enough pressure.the car tries to start but cant. any suggestions
Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.
I had the same problem and read on several foruns that the FUEL PUMP is behind the rear passenger side tire, Usually its the wiring not the pump, and in my situation it was the MAP sensor.
Acted like it was not getting gas but was, changed the sensor and it was running again.
Hey there. Well, I had the same problem on a 1999 Isuzu Rodeo. I thought I'd take the easy out and just replace a fuel sending unit. Don't waste your time. Swap out the entire fuel pump. Go to your favorite autoparts store (Autozone) and ask for them to price the fuel pump. There will be options, get the part number for the cheap one ($80 Airtex, I got mine from a place in Miami). Look up the part number on ebay and buy it for about $80 complete. Spend the money and get a new fuel filter from parts store as well as a Haynes repair manual for the truck. Follow the instructions for fuel pump removal in section 4. You should have a degree of confidence on auto repair or take is straight to a reputable shop. You do need to do some very important things (relieve fuel pressure, drop the fuel tank with the truck on high ramps or jack stands, etc.). This is NOT for the novice. Otherwise, expect the task to take 4 to 6 hours if you don't have a lift. A shop should charge 1 1/2 hours labor and cost of the pump - you need to ask yourself what your time is worth.