Question about 2000 Daewoo Leganza

2 Answers

I have daewoo leganza, and my engine broke.i want to replace but i can´t find one the same. so i want know beside of daewoo engine, is there any other engine that can fit? my country dealer doesn´t sell anymore spare parts, iam afraid, i ill lose my car, please help!

Posted by on

  • Anonymous Jul 23, 2008

    the engine broke down i need to ge another one

  • Anonymous Dec 03, 2008

    I have the same problem the car is nice but the engine no longer works where casn i get one or what other type of engine would fit.

×

2 Answers

I had same problem with my car couple years back and it was a vauxhall engine used to replace it. Although I still have my car, I have had several problems after replacing engine, like cylinder head going straight after it. Make sure if you are replacing it, it is a decent mechanic that checks everything and torques it up periodically. Like honky29 says it will be expensive and may not be worth it.

Posted on Aug 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

You can install any engine as long as you have a good mechanic willing to take on the task! this will be very expensive and wont be worth the value of the car

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing setting daewoo leganza


http://www.tradebit.com/filedetail.php/189127366-daewoo-leganza-service-manual

Aug 28, 2012 | 2000 Daewoo Leganza

1 Answer

Cable on power window for 2000 Daewoo Laganza broke in driver's door. How do I repiar?


you need to replace the window regulator there not made to repair

Jul 09, 2012 | 2000 Daewoo Leganza

1 Answer

1988 daewoo leganza broke a cam shaft belt , would this have caused the valves to be damaged , or do they miss getting hit by trhe pistons ?


Yes you are correct when the timing belt breaks most of the time the valves will be damaged on overhead cam engines. I dont believe its possable for the pistons to hit the valves though. The valves get bent because the cam stops turning but the crank does not. The pressure is what bends them. Hope this helps:)

Jul 01, 2010 | 1999 Daewoo Leganza

3 Answers

The timing belt went out on my daewoo leganza. So do i need a new engine or can other things be done to solve issue. HOWEVER WILL THIS BE COSTLY AS WELL CAUSE SOON AS TOLD PROBLEM THEY SAY I NEED NEW...


You will need to have the cylinder head rebuilt with new valves along with a new timing belt kit. It's a sure bet all the valves are bent as the Leganza uses an interference fit engine.

Mar 01, 2010 | 2001 Daewoo Leganza

1 Answer

Is the 2.2 laganza i interferance engine upon timing belt failure


Hello. The Daewoo 2.2 is an interference engine. If the timing belt broke while the engine was running, most likely all the valves are bent. In extreme cases the valves can even punch holes in the pistons.

Feb 12, 2010 | 2000 Daewoo Leganza

1 Answer

Need to get the engine no for daewoo leganza


usually under the hood there is several metal plates rivited to the bulkhead.....paint number...chassis number...and engine number...they will be marked accordingly

Jul 23, 2009 | 2000 Daewoo Leganza

1 Answer

Is the Daewoo Leganza and the Nubura 2Ltr Engine the same?


the 2 engines arent the same...the trans will not fit the engine either....harness and ecu are different as well..i wont go into detail except to say to not bother wasteing ur money on the wrong engine...keep searching u will find the right engine evntually...

Apr 11, 2009 | 1999 Daewoo Leganza

4 Answers

Daewoo Leganza 2000 timing belt broke


Hi.
If the idler pulley, broke, with the car running, (I think is the most probable), There is no way to fix the car just replacing the timing belt and the idler pulley. This is an interference engine, that means if the timing belt or the idler pulley breaks, you need to replace the whole cylinder head, that's because the valves are bent. I just fix my daewoo, I tried first to just change the idler pulley and set up the time, but it did not work. I had to replace the whole head cylinder, timing belt and pulleys.

I got the information to set up the timing belt from a Library, The program is Mitchell on demand.

Thanks

Aug 29, 2008 | 2000 Daewoo Leganza

Not finding what you are looking for?
2000 Daewoo Leganza Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...