Question about 1988 Daihatsu Charade

1 Answer

My 1986 charade turbo is running to rich....how do i ajust it???????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

Probably too late for a reply, but the CB60 engine runs rich because it needs the cooling from the fuel. If it's obviously far too rich, check your float level in the carby and that the fuel pressure reguulator has the vacuum hose fitted and that the vacuum hose is in good condition.

The only adjustment for fuel is the idle mixture screw which is usually shrouded to stop the fiddles. The adjustment is to screw it all the way in then trun it out about seven turns. As this is only for the emulsion circuit, it will have only a minor effect on normal driving fuel enrichment.

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I top up manual transmission oil on a 1986 daihatsu charade turbo g11?


Do you want to top up the engine oil or the transmission oil? The transmission oil plug is on the top side of the transmission. You need to lift up the car to do this. Best thing is to bring it to a service station.

Feb 02, 2014 | Cars & Trucks

1 Answer

Excessive noise from camshaft after head reconditioning and correct adjustment both standard setting and allowing for head being shaved - to no effect on a daihatsu charade 1991 G100


if its upper noise eg folowers and lifters if they are hydrolic lifters where these replaced are the cams ok if they are manually ajustable tappets these can be ajusted unless the following are goosed again the cams are pitted or mishapen will need new cam shaft the lifter rods are worn or week valve springs
but if they are hydrolic will have to be replaced inc cam shaft hope this makes sence ivan

Oct 01, 2012 | 1990 Daihatsu Charade

1 Answer

Quadrajet running rich, how to ajust


Turn your idle mixture screws IN to make it less rich.

Check the float height it may also contribute to rich running.

Smaller jets.

Apr 02, 2010 | 1983 Chevrolet K1500

1 Answer

I need torque settings for charade cb60-61


Thats the charade turbo - 1987-1990? Stage 1 30nm Stage 2 56-64nm
tightening sequence... flywheel on right hand side, top left to top right bolt no 1,2,3,4 ---------------------------------- bottom left to bottom right bolt no 5,6,7,8 ------------------------------------------------------------------------------------------------------- sequence is 6,3,7,2,8,1,4,5 - go round at 30nm, then round at 56-64nm -------------------------------------------------------------------------------------------------------
this is the cb61 enigne.

Jan 19, 2010 | 1992 Daihatsu Charade

2 Answers

G11 turbo carby


Hi - There is a engine manual for the cb-60 engine, can be found on the net. With drawings. I found it on an Australian Daihatsu net club, i think.
Regards.
Owner of 1987 G11 Turbo.

Apr 03, 2009 | 1988 Daihatsu Charade

1 Answer

Charade Engine running hot


u might have a sticky thermostat try takin it out and boil a pot of hot water and place it in if it stays closed or open and doesnt move it needs to be replaced

Mar 23, 2009 | 1988 Daihatsu Charade

1 Answer

My car does not start if it is heated up during previous runnig


This is one of those unsolved mysteries which is known to afflict Charade owners. By the time you go looking for the problem, the engine decides to behave.

The usual supects are: burned or improprely gapped points, faulty supressor, corroded distributer cap and leads, faulty hot idle compensator, overheated ignition coil, fuel filter, bad spark plugs.

Feb 23, 2009 | 1988 Daihatsu Charade

2 Answers

Size of Jets for 1984 Daihatsu Charade G11 Turbo Carburettor


You won't need to change the jets. We have had the Cb60 pumping 75- 90kW on the stock carby. Are you trying to increase performance there are better ways: e.g. RHF5 series turbo, lightened flywheel (4.5kg) with Mazda 121 clutch plate and 1600lb pressure plate. Swap in a G202 electronic dizzy& coil, and replace vacuum advance diaphragm.

Carby hat looks like this:





Feb 18, 2009 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63587 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...