Question about Mitsubishi Eclipse

2 Answers

I have a 1995 mitsubishi eclipse, 4 cylinder, 2.0 non-turbo. The car will crank but there is no spark and we are not getting any gas. We've checked all of the fuses and the relays. Do you have any suggestion on what to try next?

Posted by on

  • Anonymous Apr 01, 2014

    What would stop a 1995 mitsubishi eclipse from getting a spark?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Mitsubishi Master
  • 331 Answers

If you haven't checked the ASD relay, make sure its working.
I have a 1995 mitsubishi - 175c874.jpg if thats okay, check the Cam Angle and Crank Angle sensors. if it isn't any of those, its probably the ECU

Posted on Jul 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a eclipse 98 rs. Wont star i replace cam and crank sensors coil pack i found ground wire loose i fix it and car star after 10 min engine cut off now won't star again next day i try again star engine star but after 10 min die

Posted on Mar 23, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 95 eclipse non turbo i change fuel pump and relay but it wont start whats wrong ?


Its probably got an electric igniter rather than a coil, either way it sounds like your not getting for in your piston cylinder.

Feb 06, 2012 | 1995 Mitsubishi Eclipse

1 Answer

I have a 1995 Mitsubishi Eclipse it isn't getting


Check the cam angle sensor and the power transistor.

Dec 11, 2011 | 1995 Mitsubishi Eclipse

2 Answers

Where are the timing marks on a 1996 Mitsubishi eclipse?


If you have the 4-Cylinder Non-Turbo, or 420a engine, here is the overhaul manual for it, including the complete timing instructions: http://www.mediafire.com/?7j2zosdmnnl

If you have the 4-Cylinder Turbo, or 4G63 engine, here is the manual for it, including timing instructions: http://www.mediafire.com/?zhnttihoqye

Mar 18, 2011 | 1996 Mitsubishi Eclipse

1 Answer

What order do the spark plugs go in on a 1995 mitsubishi eclipse


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


For the 2.0L Turbo:
Firing Order:
1-3-4-2
Cylinders:
.......(back)
4-----3------2------1
.......(front)
Distributor:
(back)
.........o <--2
......o <--4
...o <---3
o <---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Feb 21, 2010 | 1995 Mitsubishi Eclipse

3 Answers

Put new plug wires on my eclipse now it runs crappy


You may have your plug wires in the wrong order.
The firing order is 1-3-4-2 om cpounter-clockwise rotation. Look at the digram below. Notice the shaded blue is cylinder 1. From there, make sure 3 is the next wire, then 4 and finally 2.


1f9ac8c.gif

Oct 03, 2009 | 1995 Mitsubishi Eclipse

1 Answer

Need help timinng 95 mitsubishi eclipe non turbo thank you for help


i had to take mine to a shop, the one crank was off 180 degrees becareful u dont mess it up, im not having valve truble possibly due to me trying to set it myself, plus the tensior is a pain to get to, email me if you need more info: nick_d_rhodes@yahoo.com

Apr 17, 2009 | 1995 Mitsubishi Eclipse

1 Answer

Engine swap on 98 eclipse how can I tell if I have conpatable eng


98 model had 33 psi fuel pressure.timing is 2-8 btdc idle speed 650 to 850. 95 model has 43 psi fuel pressure timing is 5 btdc idle speed is 750.check your cam sensor crank sensor . check computer fuse .check injector fuses. your has a distributor on your car you can check timing with a scan tool. as far as i see that not much difference in engines.use the scanner to see if cam and crank sensor working or computer problems.

Apr 14, 2009 | 1995 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...