Question about 2000 Mazda MX-5 Miata

1 Answer

My 97 Miata turn signals (Left & Right, Front & Rear) stopped working (along with energency flashers)I hear clicking under the dashboard. My headlights work and all fuses are good.(That I can find)

Posted by on

  • prgallogly Sep 19, 2008

    while driving, lost my turn signals and all gauges on dash except fuel and speed. Could it be my wiring harness?

  • Anonymous Mar 08, 2009

    I have a 1990 MX5 with the same problem

    All other lights OK, have lost all indicators and emergency flashers but can hear flasher under dash



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Had a similar problem with my 2000 Miata- had to have the harness inspected and found it was a ground circuit fault

Posted on Apr 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Right turn signal possible short


the wire is shorted.

trailer hitch hack job.

collision damage to rear.? wrecked the harness.



why would the flasher be bad, if left side front and rear works perfectly

we use a 15amp circuit breaker to replace the flasher fuse.

then find the short, (beaker keeps popping) when right turns are selected.

is this car under warranty?

did some one put in an illegal larger fuse in this circuit? dont

its a simple shorted line

we have a thing (real edison like) called an ammeter

we can measure the actual short, all look here its 15amps

just as the breaker trips, bingo city

then all we do is start pulling all inline connectors to find the section that is shorted, front or rear.



does that help?:

Jan 07, 2015 | 2011 Kia Sedona

1 Answer

Turn signal light right flash


flasher/blinker is busted. this is located under your dash board. remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for LEFT, other one for RIGHT turn),replace busted one.

Jun 11, 2013 | 2002 Toyota Tundra

1 Answer

Both fron turn signal flash when selecting a right or left turn, but rear lights work fine.


check the elements in the light bulbs sometimes they short together

Aug 23, 2012 | 1999 Chevrolet Lumina

1 Answer

Where does the flasher go?


Remove the lower dash trim covers from the left side of the Cadillac's dashboard, if so equipped.
    • 3
  • Lie on your back under the left dashboard and look up along the left side of the steering column. Illuminate the area with the flashlight to assist in locating the old turn signal flasher, which mounts on a metal bracket, just above and to the left of the steering column.
  • 4Grab the old flasher by hand and pull it off the bracket. Depending on the model of your Cadillac, you may need to push aside some wiring harnesses to grasp the flasher.
  • 5Plug the new turn signal flasher onto the bracket. Reinstall the lower dash covers, if you removed any in Step 2.
  • 6Place the key in the ignition. Turn the key to the "Run" position.
  • 7Activate the turn signals on the left side of the car and get out and inspect them to make sure both front and rear bulbs are blinking, as designed. Switch the turn signal lever to activate the right signals and visual inspect
  • Jun 24, 2012 | 1990 Cadillac Eldorado

    1 Answer

    I have a 2004 Scion xB and my right rear signal light isn't working. It's not the bulb because that's working and the click sound sounds off but it wont light up in the dashboard. My left signal light is...


    the light in th DASH-BOARD IS out, if you hear clicking & outside is click-g,theres not a fuse,for signals, there is a flasher-relay chk under dash or by th kick-panel or next to FUSE-CLUSTER(BOX), HOPE this helps, good-luck...

    May 04, 2011 | 2004 Scion xB

    1 Answer

    The right turn signal comes on but intermittently it makes long duration of blinks. Sometimes both the right front and right rear will be energized in the on position but will not blink at all. We have...


    You say it's the right turn signal that is malfunctioning. If the left works correctly, then the problem is most likely NOT the flasher unit. That unit provides the flash for both left and right signals. I think that flasher unit is mounted on your steering column, down under the dash. It will probably be an aluminum cylinder, but may be a rectangular black plastic block. Before you change the flasher unit, I'd suggest checking the front and rear turn signal light bulbs. On the front, those are the parking light bulbs, and on the rear are the stop light bulbs. You may have a poor connection, probably from corrosion, or the bulb is very nearly burned out completely. Good luck.

    Oct 23, 2010 | 1996 Buick Century

    3 Answers

    97 olds 88, left turn signal not blinking.


    possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

    Sep 12, 2009 | 1997 Oldsmobile 88

    3 Answers

    98 Buick Lesabre Blinker Problem


    If ALL Wiring in Trunk is Good Then Its The SWITCH = Multifunction Switch<<

    Feb 11, 2009 | 1997 Buick LeSabre

    2 Answers

    Turn signals dont work 97 Geo Metro


    we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

    Jan 22, 2009 | 1991 Geo Metro

    3 Answers

    Flasher or turn signal switch


    When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
    The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

    Jan 02, 2009 | 1995 Chevrolet Caprice Classic

    Not finding what you are looking for?
    2000 Mazda MX-5 Miata Logo

    392 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mazda Experts

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6879 Answers

    Are you a Mazda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...