Question about 1993 Toyota Camry V6
The ports are usually located on the driver side underneath the dash on the right near the center.
Posted on Jul 22, 2008
Yeah Thats Where It Is. I Have A 99 Camry So They are The Same. Also There Are A Couple Others Under The Hood.
Posted on Jan 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Stalling Toyota Camry 2004
P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!
Posted on Oct 24, 2008
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Dec 15, 2008
That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
Posted on Mar 08, 2009
it may be under the bonnet ,it is usually the accessories fuse,you may also have some fuses under the dash as well......hope this helps.....cheers
Posted on Jul 15, 2010
Tips for a great answer:
Sep 19, 2015 | Toyota Cars & Trucks
Jan 23, 2015 | Toyota Camry Cars & Trucks
Jun 04, 2014 | 1993 Toyota Camry V6
Feb 28, 2011 | 1997 Toyota Camry
May 30, 2010 | 1997 Toyota Camry
Aug 18, 2009 | 1997 Toyota Camry
1,208 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: