Question about 1992 Toyota Land Cruiser

2 Answers

Power locking hubs

I have a 92 prado ex, with power locking hubs. they are not working. when i push in the button for locking the hubs, nothing happens, i checked for voltage at the plug by the wheel and no power. fuse is fine.
contact me at gerrymines@safe-mail.net

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After 100,000Km the carbons are warn out and are usually stuck in there brush box due to grease, thus not able to transfer power from the slip-ring to the electric motor. A good sparky shoud be able to make new carbons.

Posted on Sep 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Better make sure that voltage is not really present at the terminals, the voltage at the terminals is present only for a about 3 to 4 secs which is needed to activate a small dc motor inside the hub. The dc motor when activated turns the locking mechanism accordingly. swithcing of the power button applies a reversed polarity to the dc motor which will revolve the other way around thereby effectively disengaging, this time the lock mechanism the hub. The common problem of the power locking hub is the worn out carbon brushes which connects the small dc to the power source.

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 2.7 toyota prado overheating issues coolant looks fine oils clean seems to happen when aircon is on will flucuate up n down between half and hot


Could be a blocked radiator internal or external, or a faulty viscous fan hub..

Check fan hub has resistance to turn..

Check radiator for debris..

Feb 10, 2016 | Toyota Cars & Trucks

2 Answers

When i push in my landcruiser prado model 1994 4/4 button the hub is not locking what can i do ?


You may have a frozen cable to the actuator, or the actuator itself may be bad. Check also for vacuum leak(s). Peace. God bless.

Nov 26, 2014 | 1994 Toyota Land Cruiser

1 Answer

I have a 2002 civic ex w/power locks. Both doors are locked and I can't open w/key. Remotes have not worked for a while. Is there anything i can do?


spray some ws40 or similar into the key slot to lube tumblers work key back and forth slowly should free up tumblers

Nov 18, 2014 | 2002 Honda Civic

2 Answers

2005 model turn key nothing lights on radio go dim completely dead ,new battery is fitted have full voltage ,,intermittent fault,starts after 10 min!!


Bad connection . Clean battery terminals till they shine .check the battery cable earth clean and tighter .Clean and tighten battery cable to starter motor terminal.

Aug 16, 2014 | 2005 Toyota LandCruiser Prado

1 Answer

1992 ford full size bronco xlt push button 4x4 auto locking hubs. I do not think 4x4 is working. yellow 4x4 high will come on will not go in low.


Junk the autolocking hubs for a set of good quality manual locking hubs. Your local auto parts store should have them in stock. E-Bay is a low-cost option but all premium hubs come with a warranty regarding failures and saving a couple bucks online is not worth it to me when I can warranty them at the local parts store. Get yourself a manual (Chilton or Haynes) and they will give you complete directions. As for the low range not working I found on my '92 that I had to pull the shift actuator motor off of the transfer case and re-apply the grease to the shaft as the old grease was stiff a non-pliable. It has not failed me since and I put it into low at least once a month to ensure that it works before bad weather hits.

Dec 25, 2010 | 1991 Ford Bronco

1 Answer

The power locks will UNLOCK, but not LOCK


check the relay orthe switch on the door

Aug 11, 2009 | 2000 Toyota Sienna

1 Answer

93 ranger 4x4 when you push button for 4x4 nothing happens, only use about once a month, hubs are man.


THEY IS A SOLINOID ON THE SIDE OF THE TRANS. YOU NEED TO CRAWL UNDERNEATH TO ACCESS IT CHECK TO SEE IF THE POWER WIRE HAS BROKE OFF

Mar 17, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
1992 Toyota Land Cruiser Logo

542 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...