Question about 1987 Honda Prelude

2 Answers

How change rear brakes to honda prelude - 1987 Honda Prelude

Posted by on

  • jws13 Sep 15, 2008

    1991 civic, How do I get the rear drums off?




2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure the parking brake is disengaged, with wheels blocked, relieve tension at adjusters on brake backing plates, small oblong hole at the bottom. got a manuel? hope it helps.

Posted on Sep 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Are they disc or drum brakes?

Posted on Jul 22, 2008

  • Tyler Jul 22, 2008

    I meant that as a clarification, not a solution. Sorry.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1984 Honda Prelude the brake lights are on all the time

there is a brake light switch under the brake pedal. When this switch goes bad the brakelights will stay on. It isn't very expensive and if you are any good at tinkering with things you can probably change it yurself. Though it can be a little aggravating. Any parts store would have it.

Jul 04, 2012 | Cars & Trucks

1 Answer


I would remove the cap to the master cylinder, then barely crack the bleeder valve. after that then you can compress the caliper with a c clamp. be careful, your gonna lose some brake fluid.

Oct 09, 2010 | 1992 Honda Prelude

1 Answer

Rear brake caliper piston will not go back on Honda Prelude

Have you compressed the caliper all the way? To do so, use a large 'C' clamp, open the bleeder valve slightly, and compress it be tightening the clamp. It should now fit over the brake disk. Let me know it you need further help.

Apr 05, 2010 | 1997 Honda Prelude

3 Answers

1992 Honda Prelude Si brake caliper piston prob

As your car has a handbrake fitted to the rear calipers,you will need a piston wind in tool to retract the piston fully back into the caliper as when you adjust your handbrake the piston automatically winds itself to the required position for usage without this tool you are getting nowhere,so get hold of a tool to do the job and you should not have problem unless the piston has totally siezed on the screw then you will have a problem being the only way to repair would to be a new or refurbished caliper.

Feb 28, 2010 | 1992 Honda Prelude

2 Answers

How do i change the front brakes on 85 prelude dx

go to parts jobber like parts source they will sell you the alan key

or just buy a set from home depot for 20 bucks btw there metric

Jan 06, 2010 | 1985 Honda Prelude

2 Answers

My 1995 honda preludes emergency brake doenst work, when you pull it up it comes up easy and the break light does come on, also my ABS light is on and wont turn off

The parking brake problem could be rear brakes out of adjustment, a broken parking brake cable, or a parking brake cable in need of adjustment.

The ABS light mosy likely has nothing to do with your parking brake problem and will have to be diagnosed by first gathering the ABS fault codes from the ABS computer.

Nov 09, 2009 | 1995 Honda Prelude

2 Answers

1991 honda prelude speedometer not working,what is

Probably the Vehicle Speed Sensor (VSS). Cheap and easy to change (see ebay), once found! Probably on top of gearbox, to rear.

Aug 06, 2009 | 1991 Honda Prelude

1 Answer

1989 Honda prelude brakes sticking.

pistons in brake r sticking need to b stripped n cleaned

Nov 16, 2008 | 1989 Honda Prelude

1 Answer

Changing front brakes on 2000 honda prelude

it is very simple four bolts and thats it

Sep 29, 2008 | 2000 Honda Prelude

1 Answer

Rear brake calipers

A big pair of channel locks will collaspe the caliper but it does take some muscle or you can release the brake line nut and releave the pressure but then you would have to bleed the brakes.

Aug 03, 2008 | 1990 Honda Prelude

Not finding what you are looking for?
1987 Honda Prelude Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides