Question about 1996 Ford Contour

1 Answer

1994 Ford Explorer no brake lights turn signals work running lights work checked fuses look good

Posted by on

1 Answer

Turn signal switch

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights and signal lights don't work 1994 ford explorer


If the fuses for each circuit are good and have power, the problem could be in the turn signal switch.

Aug 05, 2014 | Ford Explorer Cars & Trucks

1 Answer

Reverse light work but brake light and rear turn signal doesnt


If your brake lights and turn signals are out, you most likely have a blown fuse, burnt bulb, or a problem in the steering column.----------------------------------------------------------------------
digimaster iii

Dec 21, 2012 | 2002 Ford Explorer

2 Answers

Blinker do not work 1994 Ford Explorer, can it be a fuse, where is the fuse for the blinker


About your 1994 Ford Explorer 4.0L MFI 6cyl. the Flasher is located: Front seating area, driver side, driver side of steering column, behind access panel, mounted on fuse panel (for Turn signal).

Hope this helps.

Oct 05, 2011 | 1994 Ford Explorer Limited

2 Answers

1999 ford explorer the 2 lower brake lights won't work but the 3rd upper brake light works fine ...... whats wrong ???


check the rear lower bulbs, if good nore than likely brake lamp switrch on brake pedal, 3rd lamp rns of separate circuit

Aug 13, 2010 | 1999 Ford Explorer

1 Answer

Turn signals work, but no brake lights.i have a 94 ford explorer


THE FUSE MIGHT BE A DIFFERENT ONE THAN THE TURN SIGNALS. AND THE SAME WITH THE LIGHT BULB. IT MIGHT BE A DIFFERENT ONE ALSO.

Feb 23, 2010 | 1994 Ford Explorer Limited

1 Answer

Pass. side trailer turn and brake lights out 1999 ford explorer


if your vehicle lights are working all the fuses will be good. follow the cable from the towing socket on your vehicle , it will most likely go behind one of the rear lights to connect into your cars system,
check your tester where the cables join and you should find the problem. hope this helps.

Apr 23, 2009 | 1999 Ford Explorer

2 Answers

No turn signals or side brake lights on 94 chevy suburban


the problen is probably the turn signal switch with a test light check for power at brake switch if no power check for power at turn signal switch the brake lights are incorperated through the turn signal switch

Oct 18, 2008 | 1994 Chevrolet Suburban

1 Answer

No running lights


Brake and turn lights are on a different circuit from the run lights.Your problem may well be the light switch but it is not a given. You may be loosing power along the way. I would check for power at the cannon plugs.

Oct 09, 2008 | 1994 Ford F150 Styleside Supercab

1 Answer

My break lights dont work!!


Make sure that your hazard switch is all the way OFF I have seen this problem. But here power comes in the brake light switch from the fuse, when you press on the brake it closes and powers the other wire that goes up into the steering column into the turn signal switch and then out to the brake lights I can send you a wiring diagram if you send me your email to fixincars@yahoo.com

Jul 20, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
1996 Ford Contour Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...