Question about 1998 Chevrolet Blazer
I need a transmission diagram for a 98 LS S-10 Blazer.
SOURCE: 98 chevy s10 blazer turn signal
Unplug the turn signal relay from the fuse box and start you engine. Does it still make that noise?
If yes... Put the relay back in, that is not the problem.
If No...Then the relay could be bad, replace it!
PLEASE RATE THIS SOLUTION! Thank You Very Much!
Posted on Nov 25, 2008
sorry but your stuck with the 4l60e if you want it to be right. as for using the bravada transmission thats fine you just have to use your transfer case. your transfer case uses a switch on the dash and an electric motor on the transfer case. the bravada uses a series of sensors on the front and rear axle that sense wheel slippage and send a signal to the electric motor on the transfer case causing it to lock in four wheel drive. when the sensors dont sense wheel slippage any more the system returns to two wheel drive. that,s why they call it smart track. just unbolt your transfer case from your transmission and bolt it to the bravada transmission and install it. p.s- dont forget to at least change the front pump converter seal. for 4 or 5 bucks it,s cheap insurance against a major leak and i dont think you want to pull that transmission out again and yes i saw that happen to many times. good luck.-G.J.M
Posted on Feb 08, 2009
Tips for a great answer:
Jan 01, 2014 | Cars & Trucks
Apr 08, 2013 | 1994 Chevrolet S-10 Blazer
Jan 21, 2011 | 1999 Chevrolet Blazer
Feb 07, 2010 | 1999 Chevrolet Blazer
Jan 19, 2010 | 1999 Chevrolet Blazer
Jul 21, 2009 | 1989 Chevrolet S-10 Blazer
Apr 10, 2009 | 1991 Chevrolet S-10 Blazer
Jan 08, 2009 | 1998 Chevrolet Blazer
Apr 11, 2017 | 1998 Chevrolet Blazer
1,981 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: