Question about 1996 Audi A4

2 Answers

Replace fuel filter - 1996 Audi A4

Posted by on

  • Anonymous Aug 03, 2008

    I have a 98 Audi A4 with about 125,000 miles and I believe the fuel pump just gave out.  I was wondering if this is the type of problem that I can fix myself or if I have to take it in to get it serviced.  I would really like to get it fixed as soon as possible because it's killing me to not be able to drive and it's only been a few hours... 

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Which car do you have, the 1.8T or the 2.8 V6? I don't believe it matters, because the filters should be in the same place. If you have a B5 car (96-01), follow this procedure:

http://www.audiworld.com/tech/eng49.shtml

Posted on Jul 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check your fuel pump it might be under the back seat,where its always

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced the fuel pump and filter on a 2000 Nissan Altona it's shooting fuel from the pump but not near the filter what can cause this


Nissan fuel pump recall : Nissan Altima Common Engine ...

repairpal.com > Problems > Nissan > Altima
Nissan issued a recall on the fuel pump for premature failure. ... I am in need of a newfuel pump and scared to drive my car and its leaking ... pump and fuel filter located and how can i access them if i wan to replace th. ... 2000 Nissan Altima.

Fuel pump and fuel filter - 2003 Nissan Altima - RepairPal

repairpal.com > Questions > Nissan > Altima > 2003 Nissan Altima
Mar 25, 2009 - Where is the fuel pump and fuel filter located and how can i access them if i wan to replace them?

Fuel Pump Replacement Cost for Nissan Altima - RepairPal ...

How To Replace Fuel Filter on Nissan Altima 2001 - YouTube? 6:46https://www.youtube.com/watch?v=Vwg2wm13ilMOct 25, 2011 - Uploaded by roluardoHow To Replace Fuel Filter on Nissan Altima 2001 ... How toreplace a 2002 Nissan 3.5 Maxima Fuel Filter 2000-2004 pt 1 - Duration: 14:20.fuel hose replacement. Car fuel leakage. fuel pump ...? 5:30https://www.youtube.com/watch?v=BPGaxxkK71cApr 4, 2014 - Uploaded by LearningZoneHere I am going to illustrate the fuel hoses (fuel lines)replacement for Nissan Sentra ... Fuel pump leak fix - quick and cheap - Duration: 11:16.

Jan 13, 2016 | Nissan Cars & Trucks

Tip

How to Replace a Fuel Pump and Fuel Filter in a Cadillac


The Cadillac has an electric fuel pump, and you should check its fuses and relays and ensure you have fuel before inspecting the pump. If your vehicle still has difficulty getting fuel, you can clean or replace the fuel pump.

Things You'll Need:
Fuel pump kit
Fuel tank sending unit wrench
Torque wrench Replace the fuel pump is challenge.
1.Determine which fuel pump your Cadillac Escalade will need. This depends not only on the make and model, but also the engine size. Models built from 1998 to 2000 have a 5.7 L engine, 2002 to 2006 models may have a 5.3 L or 6.0 L engine and models built after 2006 have a 6.2 L engine.
2.Prepare your vehicle for fuel pump servicing. Disconnect the negative battery cable. Relieve the fuel system pressure, drain and disconnect the fuel tank.
3.Disconnect the fuel and evaporative emission lines from the fuel tank. Remove the fuel sender assembly and the seal with a fuel tank sending unit wrench, and pull the strainer off the fuel sender. Remove the fuel pump's electrical connector and its retaining clip from the fuel level sensor. Remove the fuel sensor's electrical connector from the fuel sensor in addition to its retaining clip.
4.Remove the fuel level sensor by squeezing the locking tangs and remove the fuel pressure sensor. Discard the old fuel tank seal and fuel strainer.
5.Install the new fuel pump using the items included in the kit and be to replace the fuel strainer and seal. Use a torque wrench to tighten the attaching bolts for the fuel tank strap to 30 ft. lbs.
The following is the instructions of replacing fuel filter:
The symptoms of a bad fuel filter include a loss in horse power, very sluggish acceleration and, in some cases, difficulty starting. Replacing the fuel filter is always the best policy because you can't reliably unclog a filter. In the Cadillac Escalade, 2002-2006, they replace easily. The 5.3L engine filter replaces in a different way. Manufacturers suggest replacement of fuel filter every 60,000 miles.
Replace the fuel filter is easy.
1.Locate the fuel filter. Normally this is on the passenger side wheel well or just inside the engine compartment. In the Cadillac Escalade, it mounts on the fuel tank and is integral with the fuel pump assembly. Before removal of the filter, disconnect the negative battery cable and relieve the pressure in the fuel system.
2.Lift the vehicle to gain access to the fuel pump assembly. Remove the threaded fittings from the filter and cap the fuel pipes to prevent contamination. Inspect the o-rings on the fuel pipes and replace if deteriorated.
3.Change the filter and reattach the fittings immediately. Tighten the fittings to 18 foot pounds. Remount to the clip and lower the vehicle. Reconnect the negative battery cable and start the ignition. To fill the filter and get gas to the ignition system, turn the ignition on for two seconds and then off for ten seconds. The vehicle should start after this.
4.Replace the fuel filter at the first opportunity. Filters are not serviceable items, they are disposable. Never rely on a clogged fuel filter for any length of time

on Sep 21, 2011 | 2004 Cadillac Escalade

1 Answer

Replacing fuel filter


Hello kenny,This article is showing the instructions of replacing fuel pump and fuel filter,you can read it ,How to Replace Fuel Pump and Fuel Filter

Mar 01, 2014 | Cars & Trucks

2 Answers

No fuel pressure after the fuel filter on Volvo s80, what part need to replace?


Are you saying there is no fuel pressure in the line, or just after the filter ? ?
If there is pressure before but not after the filter, the filter is usually blocked.

Aug 15, 2012 | 2000 Volvo S80

1 Answer

How do i replace a fuel filter


your vechicle has frame mounted inline filter,fuel filter mounts to the frame above the rear of the fuel tank, the fuel tank has to be loosen and lower down enough to replace fuel filter.first thing you need to do before replacing fuel filter,you need to relief fuel pressure by removing fuel pump relay in the power distribution center.

Jun 06, 2012 | 2000 Plymouth Breeze

1 Answer

How to change fuel filter catrige and micro filter on BMW X3


IF YOU HAVE FUEL FILTER WITH FUEL PUMP ASSEMBLY YOU HAVE TO REPLACE FUEL PUMP ASSEMBLY REMOVE THE REAR SEAT BENCH IN ORDER TO REPLACE THE FUEL PUMP ASSEMBLY. NOW IF YOU HAVE FUEL PRESSURE REGULATOR AND FUEL FILTER AS ONE UNIT.BECAUSE FUEL PRESSURE REGULATOR BUILT TO THE FUEL FILTER.TO REPLACE FUEL FILTER, FIRST DEPRESSURIZE THE FUEL SYSTEM BY REMOVING THE FUEL PUMP RELAY LOCATED ON THE COWL.THEN CRANK ENGINE UNTIL IT DIES LACK OF FUEL.THE CRANK ENGINE OVER FEW TIMES TO MAKE SURE ALL FUEL OUT THE FUEL LINES.LOCATION OF FUEL FILTER UNDER THE VECHICLE MOUNTED TO THE LEFT SIDE OF THE CHASIS.

Jul 12, 2011 | 2009 BMW X3

1 Answer

How do you replace the gas filter on a 1999 chevy venture 3.4 van?


How to Replace a Fuel Filter in a Chevy
I want to do this! What's This?

A clean fuel filter in your Chevy means clean fuel injectors and a clean fuel pressure regulator. Replace the fuel filter in your every 30,000 to 40,000 miles to keep the fuel system in optimal condition. Follow the instructions provided here to change the fuel filter on a Chevy that does not have a flex fuel system.
Difficulty: Moderate Instructions Things You'll Need:

  • Shop towel
  • Pressure gauge
  • Container for fuel
  • Car ramps
  • Wrench
  • New fuel filter
  1. 1 Disconnect the negative battery cable. Relieve the vapor pressure in the fuel tank by slowly loosening the fuel filter cap. Wrap a shop towel around the fuel pressure valve as you connect a pressure gauge to the fuel pressure valve.
  2. 2 Put the bleed hose of the gauge into a container that will hold the fuel. Open the gauge valve to bleed the system pressure. Drain any fuel that remains in the gauge into the container, as well.
  3. 3 Raise the vehicle and clean the fuel filter connections and the surrounding areas. Disconnect the fuel pipes and the threaded fittings from the fuel filter. Cover the fuel pipes once they're disconnected, to prevent contaminating your fuel system.
  4. 4 Slide the fuel filter out of the bracket on the frame rail. Check the fuel pipe O-rings and replace the if you find any cuts, nicks, or distortion. Slide the new filter into the bracket. Remove the caps you put on the fuel pipes and connect the threaded fittings back to the filter. Tighten the fittings to 18 foot-pounds.
  5. 5 Lower the vehicle and tighten the fuel filter cap. Replace the fuel. Reconnect the negative battery cable. Turn the ignition on for 2 seconds. Turn the ignition off for 10 seconds, the Chevy and check for leaks.
Tips & Warnings
  • Always let the pressure out of the fuel system before you disconnect the fuel lines. Do this carefully so as not to spray fuel on your skin, face or eyes.
  • Make sure you wipe up any fuel that may have spilled while you were replacing the filter.

Dec 04, 2010 | Chevrolet Venture Cars & Trucks

3 Answers

2002 kia sedona, can you replace the fuel filter without replacing the fuel pump


the fuel filter is inline with the fuel line in front of the fuel tank. Inside the tank is a sock that filters the fuel in the suction pipe to the fuel pump also That sock filter is always replaced upon replacing the pump only.

Apr 18, 2010 | 2002 Kia Sedona

1 Answer

Replace Fuel Filter on 2006 Chevy Aveo Hatchback


If the fuel filter is mounted inside the fuel tank at the pump it does not need replacing and is a permanent filter. All you have to do it follow the fuel lines from the fuel tank to the engine. If the filter is mounted in the fuel line you will find it.

Dec 10, 2009 | 2006 Chevrolet Aveo

1 Answer

How to replace fuel filter on a Mercury Village '95?


go here for help on villager issues

http://autos.groups.yahoo.com/group/villagerquest/

It's unde the hood, on the firewall, on the driver side.

Fuel Filters In-Tank
Removal and Installation
The in-tank fuel pump filter is not serviced separately. To service the fuel pump filter, replace the fuel pump (9350). Refer to the procedure in this section. In-Line
Removal
The following illustration is an exploded view of the fuel filter (9155).

c599850.gif
Item Part Number Description 1 9K299 Fuel Filter Upper Hose 2 9A335 Fuel Filter Bracket 3 — Fuel Hose Clamp 4 9C323 Fuel Filter Lower Hose 5 9155 Fuel Filter 6 — Fuel Hose Clamps
  1. Relieve the fuel system pressure. Refer to the procedure in this section.
  1. Remove the fuel hose clamps.
  1. Disconnect the upper and lower fuel filter hoses from both ends of the fuel filter. Plug the fuel hoses to prevent leakage and contamination.
  1. Remove the fuel filter from the fuel filter bracket (9A335).

Jun 05, 2009 | 2001 Mercury Villager

Not finding what you are looking for?
1996 Audi A4 Logo

Related Topics:

1,502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...