I was driving down the road and stepped on the gas a little too much I guess because it caused my car to die out Now it wont start It turns over and acts like it wants to start but doesnt I checked and cleaned the spark plugs hoping that would fix the problem but it didnt
It sounds like the same thing that happened to my sons car. He was driving home from school and it just died on him. It acted like it wanted to start but would not. He replaced the ignition module and now it starts. He was gotting power from the coil to the distributor, but not from the distributor. Good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try hitting the gas tank with a piece of wood,the fuel pump may have started going bad and by hitting it loosens up the pump so it might work a little enough to start it.Then you will know if thats the problem for sure.I had this problem on a friends 1991 SHO
the alternator may of went bad and stopped charging so the car died when the battery went dead. Charge the battery and test to start with. Are you saying wont turn over ot turns over and wont start. If it turns over and wont start then it could be several things. Will need to get it diagnosed to be sure
Code 33 is EGR opening not detected, this is caused by a plugged EGR exhaust passage in the upper intake manifold, this is a common SHO engine fault, the valve works but the engine does nothing that the computer can sense, since no gas flows, to verify this is the problem open the egr at idle, the engine should almost die, if nothing happens or only a tiny change in idle speed or quality the passages are plugged, if it does stall or get real rough the egr position sensor (usual code for sensor is 32) may be faulty or the valve is sticking. I was a ford dealer tech for 30 years and did quite a few of these, there is a TSB (technical service bulletin) about this problem