Question about 1993 Geo Tracker

1 Answer

Marineman What wires did you change?

Posted by on

1 Answer

What wires are you talking about????????

Posted on Sep 14, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 acura 2.2 cl engine light p0302 code


A P0302 is indicating that cylinder # 2 is misfiring...Cylinder # 2 is the second plug counting from the front to rear of engine...Main causes for misfire are: defective spark plug, spark plug wire...When was last time plugs were changed? if it has been awhile I would suggest changing them...Also the spark plug wires should be replaced...Changing one plug and/or one wire isn't a good idea; change them all...Plugs cost two or three dollars apiece and a set of wires around $15...Standard motor products wire set # 4717...Spark plugs; Bosch platinum gaped at .044

Nov 13, 2015 | Acura Cars & Trucks

2 Answers

Change wiring on 2001 rodeo alternatere


If you change the wiring, it may damage it!

Nov 12, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

Change Plugs and wiring on 2002 Buick Park Avenue?


not sure what you want to know. disconnect the plug wire from the plug one at a time then remove the plug with a 5/8 plug socket, reattach wire then repeat for other cylinders. or you can change the plug wire when you change each plug one at a time so you won`t get the wires crossed.

Aug 17, 2014 | Cars & Trucks

1 Answer

I need to change out my spark plug wires for my 2002 Chev. S-10, 4 cylinder P/u


Change them one at a time ,match up the wire size with the old ones

Apr 25, 2014 | Chevrolet S 10 Cars & Trucks

1 Answer

My wires were arcing...so I changed them...but they are still arcing. What now?


Still ?

They were changed for no reason other
than arcing & new ones did the same?

And now your here months later?

Explain that to us!

Never heard of new wires arcing & where
is this arcing taking place?

Nov 15, 2012 | 1998 Toyota Camry

1 Answer

Have 1994 toy. truck with v6, when choke goes off the engine misses


Hey 94 TOY...

When did the problem start? Before you changed the wires and plugs? Or did it start, AFTER you changed the wires and plugs? Did the problem remain the same BEFORE & AFTER you made the changes?

1 - If the TOY ran fair to Okay before you did the work, then you may have done something wrong when you made the cahages. Check for correct plugs and firing order. Check for cross wiring. With engine runing pull one plug wire off each plug one at a time. Each pulled plug wire will slow down the engine. When you pull a plug wire that doesn't react and does not make any change ON or OFF that cylinder Plug.
Then that cylinder is not firing.

2 - Check for spark at that wire. If you do-not have Spark there, But the other wires do... the wire going to that cylinder is BAD.

3 - If you have the correct firing order and spark at all cylinders then the cylinder that did-not change the speed of engine has a compresstion problem. Bad valves, Piston or rings are bad... Major engine work and Major repair bill for the repair job.... GOOD LUCK....

Oct 15, 2012 | 1994 Toyota Pickup

1 Answer

When should you change spark plug wires as well as spark plugs


There is one sure fire way to know if your plug wires are in need of changing. Wait until it is dark outside and crank your car, pop the hood and if the plug wires are bad, you will see them arcing. What that term means is that you will see sparks coming from the plug wires on to the engine itself. When you change the plug wires out, do not skimp and go for the cheap ones, they break down under heat and will not be as conductive as they should be, spend a few more dollars and get the good ones, it will be worth it in the end. If you are changing out the plug wires, you should change out the plugs as well, and you should be good for at least 70k to 100k miles.

Mar 02, 2011 | 1994 Ford Explorer Limited

1 Answer

Help spark plug wire 95 sunfire 2.2


so did u change the wires or not? - if not thats what yu need to do...esp the main coil wire. Also did u change the rotor button and distributor cap ? if not do those too.

Jan 07, 2009 | 1995 Pontiac Sunfire

1 Answer

Tips on changing plug wire


twist back and forth while yanking then i would also suggest that you give it a complete tune up. Change the cylanoid because that might be the reason for the misfiring also

Nov 17, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1993 Geo Tracker Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...