Question about 1999 BMW 5 Series

1 Answer

Resetting computer - 1999 BMW 5 Series

Posted by on

1 Answer

Unplug batteri for some time i think

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the computer to a 2004 crown victoria


I take it you changed the computer. Or why would you reset the computer that was in the car. If you replaced the computer with one specifically the same part number the computer should not need reset. If you are talking about resetting miles, that won't happen.

Oct 01, 2015 | Cars & Trucks

1 Answer

Where is the computer reset button on a 2006 dodge stratus


What computer are you talking about , engine computer. It doesn't matter because there is no reset button. You need a scan tool or disconnect the negative battery cable for 5 or 10 min. Is the vehicle check engine light on , is that what's going on here ? You can try an reset the computer, but if the computer system has a problem it will come back on. An if the light is on you need to have it scanned for codes.

Jan 27, 2015 | 2006 Dodge Stratus

1 Answer

We are having a problem with the computer under the radio saying hatch is open passenger side is open is their a way to reset it ?


you might have to reset keyless remote and or computer easy fix is on google type in search the make and model and
reset keyless remote and computer for doors very simple

May 22, 2014 | 1996 Jeep Cherokee

1 Answer

Reset computer


use a code reader to reset the CPU

Jan 09, 2014 | 2007 Isuzu Ascender

1 Answer

How to reset computer


To reset a computer disconnect the negative terminal.But that doesnot clear check engine light. This only reset the long adaptive fuel stratagy.To reset the parameter youll need a generic scan tool. Only a generic scan tool can reset the computer. There is a prom and ram. those are set and cannot be cleared

Apr 23, 2011 | 2001 GMC Yukon

1 Answer

Where is computer reset buttton for 2003 dodge stratus rt? I had heater core changed and everything worked fine until we took dash off and put it back....now it wont start? It tries to but acts like not...


There is not a computer reset button installed on the car anywhere you need to have a computer that connects to the ecu on the car (the cars computer) with the computer attached you can reset codes or reset the computer.

Jan 16, 2011 | 2003 Dodge Stratus

1 Answer

How do i reset the computer in my car?


If you want to clear codes, disconnect the battery both cables for 30 minutes. You must disconnect both cables to reset the computer, or it may not completely reset.

Apr 18, 2010 | 1999 Chevrolet Camaro

1 Answer

Codes need to be reset in my cars computer?


if you had it replaced it should have already been set however you can reset your cars computer by taking the positive battery cable off the battery and waiting 2-3 min and then touching the positive cable from the car to the negative cable which is still attached to the neg post on the battery for about 5 sec and the hooking it back up. that will reset the computer which would configure any new sensors. when the computer reads a bad code it bypasses that sensor so your car will run. it wont run to the best of its ability though - that's why you didn't pass an inspection. when you replaced the sensor the computer didn't notice because it already stopped reading that sensor when it went bad and doesnt know about the new one. when you reset the computer as i told you then it will read the new sensor and work properly.

Mar 30, 2009 | 2003 Honda Accord

1 Answer

Reset computer?


the PCM (computer) will not cause this problem, a defective fuel pump check valve will, to reset the computer (PCM) all u need to do is disconnect the battery for 10 minutes.

Mar 13, 2009 | 2006 Ford F 350 Super Duty

2 Answers

Resetting the computer


I would reset your computer. CEL will stay on unless you clear the codes or reset the computer. To reset the computer you will need to pull the negative cable off the battery for 20 Seconds, place it back on for 5 seconds then back off for 20 seconds then back on for good. Thanks for using fixya!

Sincerely,

JC

Dec 06, 2008 | 2001 Chrysler Town & Country

Not finding what you are looking for?
1999 BMW 5 Series Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...