Question about 1996 Hyundai Accent

1 Answer

Electric windows both my windows on my car have dropped, do i need to replace the whole windowtrack and motor or just the electric window motor?

Posted by on

  • jayarewallac Apr 05, 2009

    electric wndow mechanism is making the winding noise but the window is not opening



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Most likely the whole track is loose the motors have nothing to do with them dropping

Posted on Aug 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

RH electric window winder cable broken can I replace cable or have to replace whole motor cable set up

Hi Ian you need to replace the whole window regulator. Some new ones come with the motor and some without. Regards Jim...

May 19, 2015 | 2003 Kia Spectra

1 Answer

How to install a window lifting motor for a 98 Ford taurus

remove the inside door panel,, you'll see 3 bolts that hold the complete window regulator and motor, you need to drop this whole thing, be aware that the glass if stuck to the windows, so use extreme care if you need the regulator too,

Jul 15, 2011 | 1998 Ford Taurus

1 Answer

I need to replace my passenger sideview mirror for a 2003 Pontiac Aztek. How much should this cost to replace?

I just purchased the window at a scrapyard for 86.00 ... upon trying to install I found my window regulator had broken also! This is the peice that holds ur window to the electric motor to roll up and down. The regulators come with the whole motor assembly and aren't sold seperately... costing me another 107.00 plus tax .

Jan 20, 2011 | 2003 Pontiac Aztek

1 Answer

Electric windows will not go up and down need to replace motors need blue print on how ato complete the job

you have to drill the rivits out of the window regulator then remove the whole unit. replace motor. use nuts and bolts in the place where the rivits were

Sep 17, 2010 | 1997 Buick Park Avenue

1 Answer

Trying to replace window motor in sedona and cant get window to go down to unscrew regulator from window. can you manually get window down to access screws.

You should be pulling the motor off to get the regulator out anyway, and when you do, it will come down. Remove all the bolts on the reg, then drop the whole unit to remove the motor, then remove the glass. This should work. Hope it helps.

Mar 27, 2010 | 2001 Kia Optima

1 Answer

Rear window.. drooped open and won't respond to electric window switch.

remove door trim,then check if the switch works the motor,sounds like glass has dropped out of the window regulator,may need to replace it,common prob

Oct 22, 2009 | 1987 Mitsubishi Galant

3 Answers

Passenger window will not go up i think its

if the fuse was an issue then all the windows would be inop, not just one, the most common fault is the electric motor that runs the window up and down.

Oct 03, 2009 | 2003 Ford Expedition

1 Answer

Describe your 1997 Chrysler Town &

You need to replace the whole assembly. It comes as a motor/regulator.

Jul 28, 2009 | 1997 Chrysler Town & Country

1 Answer

My left rear windo is off it's track.How do I safely take off the door panel to fix

You need to get a clip remover from an autoparts store. once you remove the door panel from around the edges, make sure you check for screws around the arm rest to remove. the door panel should lift off the window frame. gently remove panel and look behind for any electric connectors. the window is connected at the bottom by a clip with a pin through it. if the window drops or wont raise up, you probably will have to replace the whole assembly, I found some on e-bay for aroun 115.00. Not real difficult if you have some tech experience, but can be tricky manuvering the motor out and back in. with some patience you can do it.

Apr 25, 2009 | Jeep Liberty Cars & Trucks

1 Answer

Window one operate but can operate passenger side from driver

Ford was notorious for bad switches on the drivers window control panel. But before you replace it pull the whole inner door panel off. You will have to unplug the switch panel to do it... check the connections on the window motor itself, then check and clean the connector that plugs into the inner door panel and the switch panel itself, If these dont fix it check an auto boneyard for a replacement switch... AAlso if you are savy with automotive electrical, CAREFULLYcheck the motor operation with a jumper wire replacing the switch to ensure it isnt a bad motor... most likely it is the switch but Murphy's law has a whole subset of rules for automotive electrical applications...

Apr 13, 2009 | 1998 Ford F250 SuperCab

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides