Question about 2006 Ford Escape

2 Answers

Transmisssion filter How do I change the Transmission filter

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have a 2002 escape so I'm not sure how much different it is for you.

There is a pan on the driver's side of the engine up towards the front by the radiator. It is sitting vertically facing the front of the car. I went through the painstaking process of pulling mine off to find the transmission filter, only to find it didn't have a filter. Everyone told me it had a filter, even the dealer. All lies =) Don't waste 3 hours of your time pulling that thing off and then trying to get it back on.

Posted on Feb 10, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

This is more diffucult than changing the oil filter for engine oil.

You must remove the transmission pan. The filter is housed within the automatic transmission oil pan and is attached to the valve body by several small screws or bolts.

You should be aware that many do it yourselfers choose to take this job to a professional!

Good Luck

Brian

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Landcruiser 200 transmisssion slips


First, change the transmission fluid and filter. That may do it. If that does not do it, look for shorts and bad or broken wiring going to the transmission. If not get the truck to a transmission shop or dealer that can scan the transmission control computer.

Feb 24, 2015 | Cars & Trucks

1 Answer

How much transmission fluid does it take when changing the transmisssion screen and filter?


When the pan is dropped and fluid is drained, to refill, it usually needs 5 - 6 quarts. When refilling, check the transmission fluid dipstick as you are adding the last two quarts. And also run the transmission thru the gears.

Oct 20, 2012 | 2003 GMC Envoy

1 Answer

Transmission i think help


try changing your fuel filter,and some fuel injector cleaner

Aug 24, 2012 | 1994 Chevrolet Lumina

1 Answer

I have 2001 pt cruiser with 147000 miles. just had transmission service and codes came back i need a speed sensor and transmission sensor. the speed thermo goes all the around when i stop plus the...


Sound like you have a bad input or output speed sensor on the front of the tranny they have two wires going to each and are pretty easy to change please rate

Aug 01, 2011 | 2006 Chrysler PT Cruiser

3 Answers

What is the total auto trans fluid capacity in the 1997 stratus


The transmission holds 8.9 US quarts. This a dry transmisssion after an overhaul. DO NOT OVERFILL, CHECK FINAL LEVEL HOT FLUID ONLY.

Feb 23, 2011 | 1997 Dodge Stratus

1 Answer

Ae92 automatic transmission is driving with one gear wont change


You have a failed component in the transmisssion, have it tested for a potential fault code.

Mar 03, 2010 | 1992 Toyota Corolla

2 Answers

Transmisssion make s noise when put in gear. I


I think at this point a proper diagnosis & estimate of repairs would be wise from a reputable transmission shop. You can always say no, but check all options, such as rebuild, replace, etc. Good Luck. P.S. sometimes a used one is a bad idea as well, unless it's confirmed low mileage & well maintained.

Jul 19, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Gears will not change in pontiac bonneville ? transmisssion


Have the trans serviced. Change oil and filter. New oil wil help clean any sluggish parts in the valve body and help the seals.Have the torque converter oil drained, so you get all the old oil out>

Jul 10, 2009 | 1999 Pontiac Bonneville

1 Answer

1996 2500 diesel auto transmisssion, auto shifting while on road


sounds like trans has gone bad, last service of filter and fluid? clogged screen or low/burnt fluid would effest but if clunking sounds like trans is shot

Jul 06, 2009 | 1996 Dodge Ram 2500 Club Cab

Not finding what you are looking for?
2006 Ford Escape Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...