Question about Plymouth Voyager

2 Answers

Plymouth voager front axle assembly diagram 2.4l eng,1998

Posted by on

  • spottydog88 Sep 06, 2008

    Plymouth Voyager shakes at lower speeds. Feels like the wheels are coming off. Felt more by passenger than driver. Any advise?


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Posted on Jul 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its the axle mine does the same thing...jack it up off the ground on both side takes the tires of and pull the axle from left to right if it moves its fried...i just bought one through where i work from napa costed me 47 dollars with 100 dollar core charge....

Posted on Nov 25, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How many quarts of transmission oil for 1994 plymouth voager transmission?

What engine does it have? And it is an auto? Also Castrol and Shell only list a Plymouth Voyager from 1996. In 1994 they list a Neon.

Feb 02, 2014 | 1994 Plymouth Voyager

1 Answer

1998 plymoth voager i put a new airconditioner belt on it but it still squeaks sometimes why

It is more than likely too loose. Adjust it according the manufactures specifications. If it still squeals the compressor may be going bad.

Jul 28, 2011 | 1998 Plymouth Voyager

1 Answer

Require front wheel bearing assembly for 1988 Plymouth Grand Voyager - LE 6cyl

very simple to change remove whichever tire is on the bad hub then remove the caliper and rotor then there is the axle nut remove this now on the backside there are 4 18mm bolts remove these four bolts then tap the bearing assembly with a hammer this may take a few smacks then go in reverse order to reassemble torque the axle nut to 110 ft pounds

May 03, 2010 | 1988 Plymouth Grand Voyager

1 Answer

How do you change the clutch assembly for a 1998 plymouth breeze

Pull the cv axles, starter disconnect all likages to the tranny, remove all bellhousing bolts, Then support the tranny, remove all tranny mounts, lower and separate. Be ready to take BATH as the Thick Gooey tranny fluid WILL come out where the axles go. You could drain the tranny first step. Supprt the engine from above so not to tear up motor mounts. Then you can start to do the Clutch. If you have never done this before. Count on a weekend. And don't take 2 weeks to do it. Have the Flywheel resurfaced before putting back together. Do it once and do it right. Replace the rear main seal and Transmission seals while you have it apart. Trust me on this.

Jan 20, 2010 | 1998 Plymouth Breeze

1 Answer

Need diagram for replacing front hub assembly on

to get the cv joint axle off on the 98 corolla, you have to remove the wheel, shock/strut, and control arm, pop it out of the transmission, and replace, i think there is a cover that you might have to take off first before you get to the cv, its been about 6 months since i replaced mine, sorry... but good luck and god bless, Please Rate me!

Nov 08, 2009 | 1998 Toyota Corolla

1 Answer

How do you change the cv joint on a 1998 grand am

You can pick up an entire re manufactured axle assembly at your local auto parts store. In order to replace the assembly you will need to disconnect the tie rod end and the ball joint. Remove the spindle nut. Push the axle stub out of the hub. Now with a suitable container under the axle to catch spilled fluid pry the axle from the transmission housing. Install is the reverse of removal. For more detailed instructions and diagrams go to vehicle repair guides.

Oct 29, 2009 | 1998 Pontiac Grand Am

3 Answers

Average cost for a cv joint on honda accord 1998

there are tow types, with ABS and W/O ABS, they come as a half shaft assmebly, this is a axle and CV joint together. here are the 2 part numbers for left and right axle with CV joint. Price and Part s are from, the lowest price on the internet I could find, very fast shipping.

A-1 CARDONE Part # 604153 {[CV Half-Shaft Assembly] Reman.}
Front Right; w/ABS

A-1 CARDONE Part # 604152 {[CV Half-Shaft Assembly] Reman.}
Front Right; w/o ABS

A-1 CARDONE Part # 604155 {[CV Half-Shaft Assembly] Reman.}
Front Left; w/M.T. w/ABS

A-1 CARDONE Part # 604150 {[CV Half-Shaft Assembly] Reman.}
Front Left; w/A.T. w/o ABS

Oct 25, 2009 | 1998 Honda Accord

1 Answer

Cannot install cv axle on 98 plymouth voyager lefthand side

This is quite a job if your not a mechanic. I did mine a year ago. With the front wheel still on the ground you need to crack and undo the large axle nut on the outside of the brake disk. Jack up and secure whole left side of car. This will tilt the vehicle so the oil wont drain out of the transmission. Remove wheel. Undo 2 large nut and bolts at the bottom of the strut. Makes job easier aswell if you undo brake caliper and remove off disc and also the tie rod end off the arm. This will allow more movement to remove the driveshaft. Pull the hub assembly outwards and push the axle end back thru and out of the hub. After this comes out you need to pull the axle out of the transmission with either a sharp pull or you may need to pry out with a large screwdriver. When fitting new axle into transmission, make sure the gap in the circlip is sitting at the top and down inside the groove si it wont damage the seal on the way in.
Hope ive helped you.

Sep 17, 2009 | 1998 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides