I have a 1992 honda accord lx and i wanted to know if my EXEL hs 113 rims will fit? it is a 4 lug but it has like 8 holes

Hey Cory, after removing all lugnuts the rim may be stuck on try spraying a lube around center and lugs and put a piece of wood aginst rim and hit it with a hammer

see the following site that I found by googling "2000 honda accord serpentine belt replacement" You will need to know what engine size and whether you have AC.
https://www.google.com/search?q=2000+honda+accord+serpentine+belt+replacement&client=firefox-a&hs=zDs&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=ylF4UoS5O6zfsAS8oYCgAg&ved=0CFgQsAQ&biw=1280&bih=896

Remove the tire and the brake drum. Get a big hammer and smack it out. Put in the new one, draw it in with the lug nut. Put brake drum back on, put tire back on, fixed.

Just google them. However get the specs on your present
rims, diameter, width, lug hole placement, etc. Usually
the mag mfg. or provider will know what mag rims fit your
car when you order.

No.

no. you'll need a car dollie.

They should aslong as they are the same lug pattern

in the same place that you check the fluid you will probably need a very small funnel

Im pretty sure the stock size wheel for the accord is a 14in wheer. Tire size I believe is 195/65/14

the bolt hole pattern on a 92 is a 4 lug pattern and a 2004 is a 5 hole pattern. they will not fit.