Question about 2006 Jeep Liberty

3 Answers

2007 jeep liberty drivers side window went down and wont come back up. motor turns. i can bring window up by hand no bind plastic still holding window to metal track.

Posted by on

  • 3 more comments 
  • foolauto Sep 19, 2008

    I had the same problem. Dealer fixed it under warranty. A few months later, left rear window did same thing. Also fixed by dealer under warranty.

  • Anonymous Nov 15, 2008

    window regulator is busted..

  • stally Dec 14, 2008

    rear driver side window went down a door will not open what to do

  • dennisowens Apr 08, 2009

    I have the same problem as of today. 2007 Jeep Liberty with 32k miles. Drivers window made a crunch noise when trying to raise. Stopped immediately and manually adjusted window then raised all the way. In December when I bought the car, after a week, the rear passenger window fell down. I love the car but will go after Chrysler if I have to pay for replacement. Maybe call the white house and ask for President's warranty office after Pres announced they will back the warranties for car buyers.

  • Anonymous Mar 31, 2014

    I have a loud creaking noise coming from the rear of my 2006 wrangler. 4" lift with 35x 12.50's. The noise only occurs at low speed and when turning, like something is binding. I have had people listen and cannot tell exactly where the noise is coming from but it is embarrassingly loud.



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When motor is all the way up do you hear a rattling in the door?

Posted on Aug 08, 2008


I had the same problem. Dealer fixed it under warranty. Guess I was lucky.

Posted on Aug 26, 2008


I have the same problem. There is a recall from Chrysler. The window regulator and window needs to be replaced. Ours was replaced under warranty. I still have the problem. My next step is to open it up myself. Seems to be a regular problem. Good luck.

Posted on Aug 13, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i check the window switch jeep liberty?

Get yourself a test light and remove the switch from the door panel, you should have 12v going to one side of the switch and when you activate the switch power should be available at the other side. If you remove the door panel and access the wires going to the window motor, you should get power to the motor when you activate the switch. If you have power going to the motor and the motor doesn't run.....has top be a bad motor.

Aug 10, 2014 | 2002 Jeep Liberty

1 Answer

My driver side window wont go up anymore. i wanted to know

Check the window switch before you go and rip the doors apart.

Jul 25, 2010 | 2002 Jeep Liberty

1 Answer

I just purchased a 2007 jeep liberty sport

I have a 2005 Jeep Liberty and the smae lever that tilts the seat also moves it forward and back. Press forward or back on the switch. Also check for blown fuse or a loose wiring connector under the drivers seat. Good luck, Techjoel

Jun 07, 2009 | 2007 Jeep Liberty Sport

1 Answer

Back passenger window will not go up, but it will go down.

It obviously takes more power to push the window up than to release it down. I believe that the regulator on your motor is going bad. I believe that you have to replace the entire assembly. It is actually a simple job to do though. You first have to pop the door panel off which is held on by plastic clips and three screws. Then pop the two linkages for the lock and handle out and unplug electrical you then have to take the wrap off that is held by black RTV that is used for moisture control. there should be to brass clips holding your window in that you need to pop off and release the window from the assembly and unhook the power wire for the window motor. Then there are about five bolts holding the assembly in (3 for the motor and 2 or three for the track) once you unbolt them the assembly will slide out. Then in goes the new one; you may need someone to help hold the window once you get it in place and you are clipping it in. I think the assembly is 70-90 dollars.

Apr 11, 2009 | 2002 Jeep Liberty

1 Answer

2003 Jeep Liberty Power Window Off Track

its the window regulator. not to bad to change. just a couple of screws to remove the door panel. peel the liner back & remove the 6 10mm bolts and uunhook the electrical connector and the window from the regulator. installation is reverse

Jan 21, 2009 | 2007 Jeep Liberty Sport

1 Answer

Rear window, door wont open from inside

i dont know if ur door is electric or for the door not opening from the inside it could be a rod has come off from the inside of the door to the handle you have to take inside door panel off and have a look.

Dec 26, 2008 | 2007 Jeep Liberty Sport

Not finding what you are looking for?
2006 Jeep Liberty Logo

1,123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides