The easiest way I have found to do it is as follows, First remove the air intake tube along with the cover for the air filter, next i remove the coil pack, i know its a pain, but it will give you a lot of much needed room. You wouldn't actually have to totally remove it, sometimes I just take off the front 3 plug wires and wire connectors and lay it down on the exhaust manifold just watch out for the 02 sensor. Remove the clamps the best way you can, Don't even mess with trying to wiggle the hoses off, just cut them or you'll be there for hours. New hoses are inexpensive for them anyway. IF I still need more room I take the top engine mounts loose and rotate the engine to the front with a small tie strap, it will open up that area even more. And to change those, you need all the room you can get.
107 views
Usually answered in minutes!
×