Question about 1998 Audi A6

4 Answers

Starter is turnig but not firing - 1998 Audi A6

Posted by on

  • petemcadam Sep 28, 2008

    my 2002 allroad is trying to start, but wont. i think it mite be fuel pump or injectors????? any other idears

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Car cranks and I got good power to the ignition. Coil and got fuel to the injectors but no communication to scanner and it turns over but won't start!

Posted on Mar 15, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My audi dose not turn over with the key but when you put power to the starter the car starts right up with no problem

Posted on Apr 28, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Audi A6 engine cranks bust does not start. i tried changing the ignition control module but still. what could be the problem?

Posted on Jan 31, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Starter switch. Plastic and cheap, my 98 A6 did the same thing... I replaced thousands in parts, turned out to be a cracked ignition switch which is a very common Audi problem!

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 Mitsubishi Pajero, wont start get power to the power solenoid when turnig the key. What would be causing this problem?


Check the start fuse first. Then try to start it neutral, not park. It could be the fuse, the safety neutral switch, or the ignition switch. My guess would be the neutral saftey switch.

Feb 06, 2015 | Mitsubishi Cars & Trucks

1 Answer

Ride on just keeps turnig over and wont kick in


hahahaha that's wat u get for buying a dmm ford

Jul 12, 2013 | Cars & Trucks

1 Answer

Problems starting turnig but not turning over


this may help diagnose your problem. with headlights on,try to start truck.do headlights dim? if so,check battery for bad.try boosting your truck from another car. check battery terminals for clean and tight. this is a must!!! if battery is good,,,,lights ,,headlights on and turning the keyswitch to start and no dim in the headlights when you turn the switch to start,bad connection to battery,or bad starter,or blown fuseable link in wiring to the starter,check for blown fuses to main,starter,e.c.m. under the hood in main fuse box. also check for a bad fuel pump relay in the main fuse box under the hood.

Sep 17, 2011 | 2001 Chevrolet S-10

2 Answers

I have a 2003 camry V6 XLE. Battery is good when turning on the ignition. But when I try to start it I just hear this "Whinnie" sound. just spinning sound every time try to start it.


You have a bad starter drive. It's not spinning up fast enough to engage flywheel. Two options, both require starter removal. #1) replace starter w/rebuilt from any good parts store - it will come w/new starter drive. #2) replace starter drive, but means disassembly of starter and is more time consuming.

Jan 18, 2011 | Toyota Camry Cars & Trucks

1 Answer

The problem is that you have to push the clutch all the way in to get the starter to fire. There must be a switch or something that lets the ignition fire the starter. Well, the starter won't fire...


try this, find switch in back of clutch arm. remove switch and hook wires together from switch. but do not try to start with clutch not pressed down. on most cars its a safety precaution. to prevent from starting if clutch is not pushed. have a good day !! clutch_switch2.jpg This one's almost too easy. All that is needed is to loop a small tie wrap around the clutch switch and switch lever assembly. After cinching it down the switch lever is permanently depressed (thereby eliminating the annoying clicking sound). If it ever becomes necessary to restore the switch to normal operation just cut the tie wrap. Couldn't be simpler. Depending on how long it takes you to find a tie wrap the entire process should take 2 minutes or less. NOTE: It is now possible to start the car without the clutch being depressed. If you do this hack make sure the car is not in gear when the car is started unless the clutch is depressed.

Dec 15, 2010 | 1989 Ford F 250

2 Answers

Anti theft system . Had to replace ignition key cylinder with new key that does not have a chip, can i bypass antitheft system .dealership says model firebird did not come with chip in key. need a solution...


The dealer is right...the 89 firebird did not come with a chipped key antitheft system. You should never have had a key with a chip to begin with.

Apr 03, 2010 | 1989 Pontiac Firebird

2 Answers

Went out to go to store Turn key just here hum


might have been the starter turnig but not moving gear out to drive the flywheel.if it only hums when you turn the key to stat it is most likely a bad starter.if you can get at the starter to tap it with a hammer or steel object while someone turns key it may start for you

Mar 20, 2010 | 1998 Saturn SW

1 Answer

2006 Ford F150 XLT 5.4 Engine has a hard time


I would check the flywheel for missing teeth or looseness. Also check starter itself.

Nov 13, 2009 | Ford F-150 Cars & Trucks

1 Answer

Scion xb wont start


Hi.. Yes i fix my problem by disconecting the neutral suitch and reconecting it ,,they get dirty with time and dont make contact ,Is a good idea to disconect and clean as many contacts as you can and put some special grease on them to prevent other problems ...

Jul 28, 2008 | 2005 Scion xB

Not finding what you are looking for?
1998 Audi A6 Logo

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13563 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...