Question about 2003 Mercedes-Benz CLK-Class

Open Question

Engine Management Light is illuminated

Car showing a malfunction to the Speedtronic/Cruise Control. Car only driving in safe mode

Mercedes CLK 270 CDi (Automatic Transmission)

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: my fan belt broke on my mercedes ml 270 cdi i need

This will work :)
4b51f2c.jpg

Posted on May 02, 2009


  • 165 Answers

SOURCE: My Mercedes ML 270 cdi ABS etc lights and gearbox.

  • you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

Posted on Nov 17, 2009

wilsodfarm
  • 986 Answers

SOURCE: hi I have a mercedes ML 270 cdi, is it normal for

It should cycle to keep the humity out of your car,I hope this helps you and have a merry xmas and please vote on this solution

Posted on Dec 24, 2009

steve_e_uk
  • 1675 Answers

SOURCE: mercedes clk 270 cdi check engine light

hi, unfortunately this is one of them how longs a piece of string things, you could purchase a code reader reset the error code but, what you have to think of is what caused it to do it in the first place, accelerating to hard should not cause an error ( i do it all the time in my car lol ) but it might be related to the 02 sensor getting to much unburnt fuel passing it which would cause the engine light to come on, though if the car is running as normal i doubt that will be the issue, i would myself on a car like that take it to the main dealer and get them to check it out, as buying an inexpensive code reader might not cut the mustard with this one, and parts being as dear as they are for merc's i would play on the safe side, spend a few bucks to save a load...sorry not much help

Posted on Mar 25, 2010

  • 22 Answers

SOURCE: Looking for Mercedes Owners manual Mercedes ml

Hi Jack.... my name is Steve Wright.... Go search "mercedes benz owners manual downloads"....... good sites, you will find what you need there.......... regards Steve

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My engine management light is on, Toyota Prius 2004?


Drive slowly and carefully to preferably dealer or your favorite auto parts store and ask them to read the error codes.

Mar 27, 2015 | 2004 Toyota Prius

1 Answer

I have an ESP problem in my Mercedes Benz C220 CDI, 2008 and the problem is an ESP CURRENTLY unavailable. Cruise controls and speedtronic inoperative


It is usually a ABS wheel speed sensor has gone faulty, but you would have to have electronic diagnostic done to read off a fault code (DTC) and maybe a live data scan . Hope this helps

Nov 21, 2014 | 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

How do you activate the cruise control on a Mercedes ML 270 cdi.


If you know how to set your speed limiter. To set your cruise control, press the stalk in (to the right). The orange light on your dash should go out and you're ready to set your cruise control. You can start the cruise control by either moving the cruise control stalk up or down. Once you start the cruise control you can move the stalk up or down to increase or decrease your cruise speed. You can move it toward you to shut off the cruise control. You can press it in again to go back to the speed limiter. I hope this helps.

Oct 20, 2014 | Cars & Trucks

1 Answer

I have a mercedes-benz clk 270 cdi avantgarde and the other day the battery light/visit workshop came on....poly v belt replaced, but the warning light still on......any suggestions??


YOU NEED TO ERASE TROUBLE CODE WITH A CODE SCANNER.IF CODE HAS BEEN ERASED AND WARNING LIGHT STILL APPEAR MAKE SURE ALTERNATOR BATTERY POWER FEED WIRE AND CHECK WIRE COMING FRONT SAM CONTROL MODULE WITH FUSE AND RELAY MAKE SURE WIRE IN PLACE TIGHT NOT DAMAGED. CHECK MAIN FUSE IN FUSE BOX THAT SEND POWER TO STARTER AND ALTERNATOR.

Jun 28, 2011 | Mercedes-Benz CLK Cars & Trucks

1 Answer

My 1999 clk 320 suddenly will not shift out of 3rd gear, its been going good for 184000 miles and all service has been done by a mercedes mechanic


sounds like the transmission is in limp home mode where it won't shift out of second gear. this is a fail safe mode. If the check engine light is on too then its probably not seeing one of the speed sensors in the transmission. Just need to have the codes pulled in the transmission control module.

Oct 01, 2010 | 1999 Mercedes-Benz CLK

1 Answer

Mercedes clk 270 cdi check engine light


hi, unfortunately this is one of them how longs a piece of string things, you could purchase a code reader reset the error code but, what you have to think of is what caused it to do it in the first place, accelerating to hard should not cause an error ( i do it all the time in my car lol ) but it might be related to the 02 sensor getting to much unburnt fuel passing it which would cause the engine light to come on, though if the car is running as normal i doubt that will be the issue, i would myself on a car like that take it to the main dealer and get them to check it out, as buying an inexpensive code reader might not cut the mustard with this one, and parts being as dear as they are for merc's i would play on the safe side, spend a few bucks to save a load...sorry not much help

Mar 25, 2010 | 2005 Mercedes-Benz CLK

Not finding what you are looking for?
2003 Mercedes-Benz CLK-Class Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...