Question about 1999 Saturn SL

2 Answers

The factory alarm won't let me start the car.

Posted by on

  • Anonymous Feb 28, 2009

    i got a 1993 volkswagen golf that it's alarm has gone to ****! It won't let me start my car unless i go under the hood any manualy do it my self. I was wondering if there was any way of trying to disconnect it?

×

2 Answers

Hi there put the key to on leave sit for about 10 min. it will reset itself....

Posted on Sep 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try pulling and resetting the 30amp ignition fuse - my 1999 Saturn SL1 1.9L has the same problem.

Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm won't shut off on 1999 Chevy blazer 4x4


Is it factory alarm or aftermarket??. Try using the key to lock and unlock the doors driver and passenger then turn the ingnition on with the key and leave it in the key on engine off position for a few minutes and start the vehicle

Oct 14, 2012 | Cars & Trucks

1 Answer

How to deactivate factory alarm system


Try to find on the fuse box the fuse of the alarm. Take one after one the fuses out and find witch one in for the alarm. After that the alarm won't work if the fuse is not there.

Aug 23, 2012 | 1999 Toyota Avalon

1 Answer

Car starts and runs but alarm won't shut off


Most models with factory alarm system can be reset by locking and unlocking the driver's door with the key.

Jul 13, 2012 | Cars & Trucks

1 Answer

How do you bypass burgler alarm


Is it an aftermarket unit or a factory alarm? An aftermarket unit has an external siren under the hood. Drop the lower part of the dash on driver side and visually inspect for non-factory wiring. There is almost always an impact sensor attached with cable ties that reacts to small impacts on the harness. There are LEDs on the sensor that will help you identify it. Trace the wiring harness of the sensor until you find the control module of the alarm. Simply unplugging the main harness of the control module will bypass it. You must be very careful when doing this because some alarms have a closed circuit to your starter wire going through the alarm and unplugging it will open the circuit to your starter and your car won't start until you connect your starter wire back together.

Jun 21, 2012 | 1999 Mercury Cougar

1 Answer

Car won't start since i took out factory radio


That's because the factory radio is also the alarm/anti-theft system.

Oct 14, 2011 | 2002 Chevrolet Impala

2 Answers

I started my car on day and the next day I unlocked the door and the alarm started and would not stop. My buddy diconnected the horn and the car won't start...help


i believe if you put key in ignition turn it forward and back off twice it should reset the anti theft to start it. or unlock pass door with key and that might reset it. also try the same with back pass door if the other didnt work. hope this helps.

Sep 09, 2011 | 1992 Nissan Maxima

1 Answer

Factory alarm started acting up a few days ago, now car won't start. only hear single click noise. managed to jump started it once


Could be the battery is dead or dieing. When batteries start to go they will cause the security to act up. Plus other things

Aug 08, 2011 | 2006 Hyundai Tiburon

1 Answer

Factory alarm won`t let start my durango 2004


lock your doors from inside shut door and unlock from out side then try to start.

Apr 13, 2009 | 2004 Dodge Durango

1 Answer

Car won't start after change battery


Your vehicle has 2 ignition wires that you can put back to factory, and start the vehicle.
The wires you are looking to put back together are PINK and DARK GREEN - and found under the D/S dash. (ignition harness - right side of steering column) They will be larger in Diameter than the others.
They were cut to install the security system. They go into the "brain" and out the other side. A relay inside the BRAIN is most likely failing.
If you no longer want the alarm installed, simply match up all of the factory colors. Use crimp-on but t-connectors for secure connection.
Let me know if you need more help.

Jan 14, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

Factory installed alarm won´t deactivate


Open the door insert key in ignition. turn to on

Now hold down the red button which should be flashing, untill silent

this will deactivate the alarm.


Jun 29, 2008 | 1999 Mitsubishi Montero Sport

Not finding what you are looking for?
1999 Saturn SL Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...