Question about Dodge Stratus
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pull the IAC out and make sure that there is nothing blocking it from the throttle body from cleaning it. while you have it out go ahead and clean the IAC. the only way that I know to check it is pull it out and leave it plugged up to the connector turn the car on but dont start and see if the probe moves in or out.
Posted on Oct 22, 2009
SOURCE: 1996 dodge stratus high idle?
hi, the idle on a car can be changed by a couple of things... usualy the one that will cause high idle before anything else will be if there is a air leak lettting air into the intake anywhere after the airflow sensor, this is because the sensor cannot read the amount of air entering the engine so it cannot compensate... the easiest way to test this is first to lissen for hissing etc and if there is some noise you can spray a bit of 'easy start' in the general area and it will be sucked in with the air and the car will idle differently again.. be carefull with the easy start it can be dangerous with the engine running, a mechanic will usualy have a machine that senses air leaks
Posted on Feb 10, 2010
it sounds like a broken wire in the engine wiring loom disconect the wires from the coil pack and and check for continuity from them to the engine controll module
Posted on Apr 15, 2010
Tips for a great answer:
Apr 25, 2015 | 2006 Dodge Stratus
Feb 22, 2015 | 2005 Dodge Ram 1500
Feb 12, 2015 | Dodge Cars & Trucks
Jan 25, 2015 | 2004 Dodge Stratus
Mar 24, 2014 | 2005 Dodge Stratus
Mar 19, 2011 | 2005 Dodge Stratus
Apr 15, 2010 | 1996 Dodge Stratus
Feb 10, 2010 | 1996 Dodge Stratus
Aug 08, 2009 | 2002 Dodge Stratus
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: