Question about 2007 Mercedes-Benz C-Class

1 Answer

Mercedesbenz220cdi2008 what to change the audio system of it and place the another system there so how can i do

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Its simple.
You will need to remove the center air vents, and take the gear selector surround apart. Details are on the web, join, and do a search. I used this guide to take my audio 10 out.
Facia are available from any good audio store, have a good selection.
Get your self a PAC Steering Wheel Radio Control Interface, that will allow you to keep the steering wheel controls, look up
These are two little electronic devices, one programmed for the car, the other programmed for the type of replacement system, eg. Alpine, JVC etc. They connect to the car via two brown leeds, know as Can high and Can low. Instructions are excellent, and the USA tech support is good too.
One point to remember, the plug on the mercedes audio has no switched live, I used the live from the ciggy lighter.
Why not try logging on the Mercedesclub. org. uk site, its free to register and there are people with far more Mercedes knowledge then you will find here
Good luck with your install.

Posted on Sep 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Witch modern audio unit fits Jaguar XKR 2002 ?

the jaguar audio system in your car is made to fit in the console stack so to get one to fit is not easy the best way is to get a premium jaguar audio unit for that model/year car ie with amplifier module etc and fit that so not to destroy the origional console fitment. depending the exact model/year the system may also use d2b fibre optic for audio transfer if its the all alloy version 2002 on thats the system not easy to change audio system in modern cars like that. hope that helps

Feb 27, 2017 | Jaguar Cars & Trucks

1 Answer

I recently changed a discharged battery of my Toyota Sequioa 2008 model, and now my entire JBL Navigation and Audio system is not working.

by changing the battery with out maintaining a voltage for the radio and any other electronic gear , you have lost codes and other operational information that you will have to reinstall to get it all to work again

Jul 07, 2016 | 2008 Toyota Sequoia Limited 5.7L V8

1 Answer

My audio system did not start this morning. I pushed the power button, but nothing happened. All other systems are functioning normally. I checked the audio system fuse and is OK.

remove the audio system from the car and check it directly from a power source if it is OK then check the battery connection to it and if not you need it to fix it perhaps change the inner transformer or something.please give me a feed back

Mar 15, 2010 | 2007 Toyota RAV4

1 Answer

2005 Ford Mustang GT -loud clicking noise in audio system

There is a possibility that the cellular phone is interfering with the audio system. Cell phones communicate on their own with cell hubs to change locations, or to receive mails. Try to place the celular in a different position, or to turn it off on a single trip to see if the clicking disappears.

Jan 30, 2010 | Ford Mustang Cars & Trucks

1 Answer

CD's won't eject or play, Toyota 2002 JBL system

sorry it needs to be removed and sent to a elctronics repair shop. there is no easy fix.

Nov 17, 2009 | 2004 Toyota Sequoia

1 Answer

How do i shut off the security system after replacing the battery

On EX, SE, and EX V-6 models
If you are talking about the overall security system in which the horn sounds and a combination of headlights, parking lights, side marker lights and taillights flash (and may also involve your radio), the alarm continues for two minutes, then the system resets. To reset an alarming
system before the two minutes have elapsed, unlock either front door
with the key or the remote transmitter. I believe this works when a battery has been changed.
If you are talking about the radio, Your car’s audio system will disable
itself if it is disconnected from electrical power for any reason. To
make it work again, the user must enter a specific five-digit code in the
Preset buttons. Because there are hundreds of number combinations
possible from five digits, making the system work without knowing the
exact code is nearly impossible.
You should have received a card that lists your audio system’s code
number and serial number. It is best to store this card in a safe place at
home. In addition, you should write the audio system’s serial number in
this Owner’s Manual. If you should happen to lose the card, you must
obtain the code number from your Honda dealer. To do this, you will
need the system’s serial number.
If your car’s battery is disconnected or goes dead, or the radio fuse is
removed, the audio system will disable itself. If this happens, you
will see ‘‘Code’’ in the frequency display the next time you turn on the
system. Use the Preset buttons to enter the five-digit code. If it is
entered correctly, the radio will start playing.
I hope this helps you.

Oct 23, 2009 | 2002 Honda Accord

1 Answer


I had the same thing happen. Any resolution?

Apr 05, 2009 | 2006 Infiniti M45

1 Answer

Bose audio system error codes 31,33,30?

The trunk mounted 12 disc magazine changer with the Bose audio system is made by Pioneer. Mine is a bit flaky too so I try to avoid unnecessarily swapping out the CD's. Those error codes can mean anything from a defective/wrong disc type (it does not support MP3 discs), a disc being upside down, or forgetting to close the magazine loading door. It can also indicate condensation on the laser lens or a system malfunction. There may be a list of error codes in the owner's manual if you have one, I currently don't.

Assuming you have checked all of the possible human errors above, there are aftermarket sellers that claim you can adapt an aftermarket changer to the Bose system albeit with with inferior sound quality to the original system. Bose is typically well-known for it's audio quality. That being said, the other option would be to seek a repair facility that can repair these changers. There are some places on-line that repair car audio that also might be able to help.

A cheaper workaround might be to hook up a portable CD/MP3 player using a cassette adapter. Assuming the cassette player, amp and speakers are good, you would possibly still get fairly high quality sound from the Bose system.

Best of Luck!


1996 Oldsmobile Aurora
4.0L DOHC 32V V8
Bose Audio w/ 12 Disc Changer
Autobahn Option

Jun 23, 2008 | 1996 Oldsmobile Aurora

1 Answer

Car audio

what do uwhat to no bout it theres no screws besides one in the vent but what ur going tohave to do is break the black piece and get anthor one sorry to tell u that but if u dont want to do that then take it to a car audio place

Jun 02, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
2007 Mercedes-Benz C-Class Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

77186 Answers

Joseph Prosser

Level 3 Expert

771 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides