Question about Suzuki Swift

2 Answers

Hi I have broken my only key in the ignition this morning Dont know how to fix or costs ,please could you advise.Thanks

Posted by on

  • novachaser Jul 21, 2008

    Thanks for the suggestions ,I will try both and use this site again and recommend to others

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

The eaisest way would be to find a used switch and replace the old one, If this key broke you might break another one with the same switch. This job is not hard t all, iven a begginer can do it. just watch where everything goes when you take it off

Posted on Jul 21, 2008

Hi there if your key has broken in the barrel you might be able to get it out with a strong magnet or a pin if not you will have to take the barrel out and strip it down if its broken at the **** of the key you may only need that peice and take it to timpsons they can cut you a new one. If the key is broken further towards the tip you will need both parts and a key cutter will still be able to cut you a new one hope this was a wee bit of help to you

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition starter switch


Your Immobilizer is broken. The Immobilizer or SECURITY RING in the Ignition is broken, you need to replace the Ignition switch in your car. Be grateful you do not own a Volvo. $1,780 repair....

Feb 12, 2014 | Dodge Charger Cars & Trucks

1 Answer

2005 Volvo S40 with key stuck in ignition. It turns off but key doesn't come, out of the steering wheel. Please advise needed, if lock change is required estimated cost of part and labour please.


Some ignition system locks will not release the key unless you push in towards the column while turning further off. It is a safety device to stop in advertent removal of the key while moving. Try that first.

Apr 08, 2013 | 2005 Volvo S40

1 Answer

2002 Mitsubishi Galant ignition replacement??


um u could go to mitsubishi and ask them for a ignition they should b able to give you the same 1 as ur key so u will only need 1 key to unlock and start your car :-)

May 12, 2012 | Cars & Trucks

2 Answers

Having difficulty turning the key to start the vehicle. The worn out key works better than the less used one. will start if you leave the keys in the ignition but when you take it out seems to lock up


Sound like ignition teeth are just worn out from use. The reason the worn out key works better is inside ignition has formed to it, only way to fix this completely, is replace ignition, before no key works. Let me know , thanks mike

Jun 08, 2011 | 2007 Saturn VUE FWD 4

1 Answer

I have a vy holden commodore sedan and Ive broken my key off in the ignition i know stupid but it still works put the other end of the key in fine it turns starts but i locked the steering wheel and i need...


hi, what i did when that happened to me, i took a hack saw blade and cut a strip off the serrated side, do it as thiny as you can and push it in the ignition so the theet of the blade face the theet on the key, give it a gentle pull and hpefully it'll pull the broken piece off the ignition switch...

Oct 05, 2010 | Ford V6 Pony Cars & Trucks

1 Answer

2000 toyota corolla key will not turn in the ignition switch. tried jiggling the key, etc. but no luck. need idea on fix and approx cost in northern virginia area. thanks


Put a little machine oil on the key and insert it into the lock, move it around a bit and try again. You might be lucky. I have done it before successfully. Don't force it too hard, a broken key in the ignition is a bigger problem.

Feb 25, 2010 | 2000 Toyota Corolla

3 Answers

Hi there i drive a mgzr 1.4i trophy se 2006...the starter motor makes noise after the car starts,,starts evey time ,but the noise is worring,,my bat went flat the other day and dont no if thats the...


You have a fault with the starter motor.That can drain the battery having a short in the motor.Changing the starter motor will solve your problem.

Nov 18, 2009 | 1999 BMW 323 Series

1 Answer

Hi!


First you must check to see if you have installen the new system properly by checking all your conections..and that they are conected to the proper wires..the instructions provided for you frome the alarm companny will guide you..pay close attention when installing your new system as manny of the problems that occur are do to iproper instalation...hope this helps you...

Oct 20, 2008 | 1997 Mitsubishi Mirage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...