You need the special tool that holds the water pump pulley while you undo (clockwise!) the main nut... which is 32mm. The tool is a long thin metal piece with two holes and a cutout for the round pulley. The holes hold the nuts to stop the pulley from spinning.
My 2003 Jetta TDI vibrates. I have 180,000 on the engine. The mechanic has checked everything and...
(More)
My 2003 Jetta TDI vibrates. I have 180,000 on the engine. The mechanic has checked everything and everything checks out fine except the engine vibrates a lot. It did not always do this. Is there something that can be done to reduce or eliminate the engine vibration?
I drove my f-350 diesil to the store for supplies with no problems. 10 minutes later after loading...
(More)
I drove my f-350 diesil to the store for supplies with no problems. 10 minutes later after loading up the truck, I was suprised to fing that the transmission (automatic) would not shift out of 1st gear until I backed off the throttle as though it were a standard transmission. I suspect that it is the tcm. what do you think.