Relay for hazards and turn Signals

do your signals work ? listen when signal is on the (clicking noise) when you find that flasher relay is next to it.

Actually there is a relay however it is not an individual part. The turn signal relay and the hazard relay are in the LCM (Lighting Control Module). This is expensive to replace however you should test the multi-function turn signal switch first as I am having the exact same problem with my 95 Crown Victoria LX. If you go to any parts store they will tell you that it is just a relay and sell you one for the newer Crown Victoria models. However in the 95 to about 2002 models they employed the bad idea of the LCM.Good luck.

There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.

Yes, the problem is the turn signal flasher is defective. You can has two flasher relays. One for the turn signals and one for the hazard lights. That is why the hazard lights flash and the turn signals do not. Replace the turn signal flasher relay located on the drivers side of the steering column, mounted behind the instrument cluster in the convenience center. They are both mounted in the same location so turn on the hazard lights and the one that you put your finger on that is not clicking is the turn signal relay.

Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

the hazard button is the relay for both the turn signals and the hazards. you have to remove the trim panel that the hazard switch and radio are in pull it out of the back of that panel

Thats strange they should be on the fuse panel ! Are you sure !!!!

try replacing the hazard relay it should be under the dash try turning it on and off with your head down by the floorboard to pinpoint the right relay and the location. you should be able to hear it easily. hope this helps.

The Hazard and turn signals share the same relay module located in the dashboard behind the hazard switch. Remove the trim by prying from the sides (Either side of the Cup holder drawer and Card drawer). Pry the hazard switch assembly out from the dashboard. The relay is part of the hazard switch assembly.

Unclip the wiring terminal from the relay. replace with appropriate relay. Part costs under $50.00 delivered from Import Parts Specialists.

The Buick Century uses separate relays for the hazard warning and turn signal functions. The turn signal relay is located on the accelerator pedal bracket, and the 4-way flasher relay is located on the convenience center near the left kick panel. Try switching these two relays with one another to see if your turn signals work instead of your 4-ways.