Question about 1998 Toyota Celica
What makes you think it's the security system.
1. Check if you are getting a spark, by using a spare spark plug in one of the plug leads, laid on the side of the engine?
2. If not: a. check distributer cap and rptor arm are OK.
Let me know the answers
Posted on Jul 21, 2008
Tips for a great answer:
CTD system, the RIM commands the instrument cluster to control the indicator only when the ignition switch is OFF.
PASS-Key?® III System The PASS-Key?® III system is designed to help prevent vehicle theft by disabling the engine unless an ignition key with a specific electrical value is used in the ignition lock cylinder. The PASS-Key?® III system operates independently of the CTD system. Protection is provided even if the CTD system is not armed. The components of the system are the ignition keys (black or gray), ignition lock cylinder, Theft Deterrent (VTD) module, Reader Exciter, Powertrain Control Module (PCM) and two starter relays (START 1 and 2) in the underhood fuse block.
Oct 06, 2016 | 1999 Cadillac Seville STS
Jun 24, 2016 | Cadillac Cars & Trucks
Valet key (gray plastic end) which can start the vehicle and unlock/lock all doors, but can not unlock/lock the storage compartments, or rear compartment lid lock.
Important: The transponder values are not readable and can not be serviced separately.
Theft Deterrent Module The theft deterrent module contains the software for controlling the VTD System. The theft deterrent module uses the following inputs and outputs to control the VTD system.
Battery voltage from the underhood fuse block PCM/BATT fuse, circuit 240 (ORN).
Ignition start voltage from the ignition switch, circuit 1390 (WHT).
Ground, circuit 450 (BLK).
Outputs Password exchange with the PCM (fuel enable), class 2 message circuit 1807 (PPL).
Powertrain Control Module (PCM) The PCM verifies that the passwords received from the theft deterrent module via the class 2 serial data line are valid. If a password is invalid the PCM disables the fuel delivery system. If the password is valid the PCM enables the fuel delivery system.
Starter Relay The starter relay is controlled by the PCM module via class 2 serial data (CKT 1807 PPL). If the theft deterrent module measures the correct transponder value, the PCM module switches the starter enable control (CKT 447 YEL) to ground. The relay is energized if the ignition switch is in the START position and the gear selector is in the PARK or NEUTRAL positions.
Mar 24, 2015 | Cars & Trucks
Nov 28, 2014 | 1996 Toyota Celica
Mar 30, 2013 | Cars & Trucks
Theft Deterrent Fuel Disable Signal Received
Perform the Powertrain Onboard Diagnostic System CheckPassword Learn Procedure - Attempt to start the vehicle (leave the ignition "on"). The Theft System telltale will flash for 4 seconds and then remain "on" for 10 minutes. Theft System Learn Mode will display Disabled on the Scan ToolTurn the ignition "off" after the Theft System telltale goes "out".Repeat steps 1 and 2 two more times. After the Theft System telltale turns "off" on the 3rd key cycle, and Theft System Learn Mode will display Enabled on the Scan Tool, attempt to start the engine. Once the engine starts the password is learned.
Oct 27, 2012 | Cars & Trucks
Car Factory Alarm will go off? http://repairhelpcenter.blogspot.com/2012/01/toyota-avalon-factory-alarm-will-go-off.html
---------Car will not start security lock out? http://technoanswers.blogspot.com/2011/12/car-will-not-start-security-lock-out.html
---------Alarm will not disengage? http://technoanswers.blogspot.com/2012/01/ford-pickup-alarm-will-not-disengage.html
--------This will help.For more info keep updated.Thanks.
Feb 09, 2012 | 1998 Plymouth Voyager
Oct 13, 2010 | 1996 Pontiac Sunfire
Mar 05, 2010 | 1997 Chevrolet Lumina
170 people viewed this question
Usually answered in minutes!