Question about 1996 BMW 318

1 Answer

Ignition problems old ignition was stuck in on position so bought another 1 and installed it and now my car want crank. will someone please help me out?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not starting like a flat battery ..though fully charged and some whirring in dash...eml light comes up for a few after secons after trying.

Posted on Jul 20, 2008

  • archemedes Jul 20, 2008

    2004 6 cylindar 320ci

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Steering wheel wont lock and stuck in park


In the fuse block under the drivers side rear seat check the ignition 0 fuse. In the under hood fuse block check the B/U fuse and the BTSI fuse. If the b/u fuse is blown than you would not have back up lamps.

Dec 02, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Installed brand new starter, battery fully charged, and still wont crank. It starts when I kick start it. 1988 nissan pathfinder. What else could be the problem? Relay switch? Or ignition? Please help


Check the ignition switch, and the wiring to the starter solenoid. Get someone to turn the key to the crank (start) position and check for voltage at the starter solinoid. Check the starter relay and all fuses.

May 09, 2011 | 1988 Nissan Pathfinder

1 Answer

I am working on a 1999 olds alero that wont start just rolls over . The security light is not flashing. I have changed out the ign, & the crank sensor. I started once then i stut it off & tryed it...


IF YOU REPLACE CRANKSHAFT SENSOR IT HAS TO HAS TO BE RELEARNED USING TECH 2 SCANNER.FOR THE IGNITION KEY REPLACEMENT.TURN IGNITION SWITCH TO THE ON POSITION FOR 10 MINUTES WITH ENGINE OFF.WHEN SECURITY LIGHT TURNS ITSELF OFF.THEN YOU TURN OFF IGNITION SWITCH FOR 5 SECONDS.THEN START THE ENGINE.

Jan 20, 2011 | 1999 Oldsmobile Alero

1 Answer

Ignition switch stuck in ''on'' position


Unplug the electrical connection on the ignition coil

May 30, 2010 | 1996 Mercury Sable

1 Answer

I have a 2004 chevy trailblazer and i think the anti-theft system turned on and it won't let me start my car but everything else goes on. This happend to me before and i had no car for a week and someone...


put key in ignition turn to the on position for ten minutes. dont touch it watch the security light on dash . after 10 minutes it should be off. if it is off turn ignition switch off for 5 secs. then proceed in cranking it. if security light dont turn off. you have bcm problems. it have to be towed in.

Apr 07, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

Change ignition cylinder? (lock?)


the new cylinder's key has a different code, so the anti-theft module has to reset to accept that code, with the old cylinder u could program extra keys as long as u had one key that worked, but since that is not the case with a new lock cylinder I think u are stuck with taking it to the dealer, any GM dealer can do this job, call around and try to get a lower estimate. Before having it towed try this work around I found on a car thread on this issue:

1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your key. Not sure this will work but it is worth a try.

Dec 15, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
1996 BMW 318 Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...