Question about 1991 Mercury Topaz 4 Door

1 Answer

I have a 1996 chevy tahoe

Door wont lock

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Take door panel off and make sure the connecting rod from the lock button the the locking mechanasim are still connected

Posted on Mar 23, 2009

5 Suggested Answers

autodr
  • 260 Answers

SOURCE: Chevy Tahoe

i will try to help. the bottom of panel should just pry apart with flathead. there are screws in the door "puller". remove small panel at door mirror, one screw there. the power window switch will clip in on one end. pry up carefully on one end and look underneath it to see connection. slides in on one end and clips in on other. one screw under there. the plastic cover behind inside handle release should be pryed carefully to expose. trick is to be careful and take your time. hope this helps.

Posted on Nov 15, 2008

  • 1 Answer

SOURCE: power locks for rear doors and hatch not unlocking

you have two relays on the interior fuse block one for locking and one for unlocking. Swap them and see if the problem is now such that they will not lock. If so you have your answer.

Posted on Aug 30, 2009

  • 7133 Answers

SOURCE: 2007 chevy tahoe driver side door handle will not open door

the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix

Posted on Mar 13, 2010

Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"

  • 1 Answer

SOURCE: power door locks on a 2004 chevy tahoe don't work

The door locks on my 1999 tahoe stopped working and I checked the fuse, which was fine. The problem turned out to be that the fuse for my cigarette lighter was bad and for some reason it also must be working in order for the door locks to work. Put in a new cigarette lighter fuse and the door locks worked again!

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open the cargo door if it wont open?


rear door hatch lock repair GMC Chevrolet - YouTube

? 4:26
https://www.youtube.com/watch?v=QS3PMhGgyAg
Apr 5, 2014 - Uploaded by auto resource
2002 Yukon, rear hatch lock not locking. ... rear door hatch lock repair GMC Chevrolet. auto resource ... chevy tahoe lift gate notopening - Duration: 2:12. ... A Method how to unlock your car in 10 seconds :) - Duration: 0:35.

chevy tahoe lift gate not opening - YouTube

? 2:12
https://www.youtube.com/watch?v=xU6ybiY3F4I
Sep 1, 2010 - Uploaded by 76bluemoon
Back lift gate/glass would not open or release. Even when unlocked with the key fob or the unlock switch on the drivers/passenger door. ... How To Install Replace Rear Lift Gate handle 2002-09 GMC Envoy Chevy Trailblazer ...

Jan 16, 2016 | 2002 Chevrolet Tahoe

1 Answer

96 tahoe back doors wont disengage


If they won't open from the inside but will from outside check the child lock slide switch on the edge of the door while open.

Oct 22, 2014 | 1996 Chevrolet Tahoe

1 Answer

1997 chevy tahoe pwoer lock inop. need wire


mite want to ck wires that go between door & door jam,,mite be broken wire?? just a thought,,

Jan 27, 2010 | Chevrolet Tahoe Cars & Trucks

2 Answers

Power door locks on a 2004 chevy tahoe don't work


The door locks on my 1999 tahoe stopped working and I checked the fuse, which was fine. The problem turned out to be that the fuse for my cigarette lighter was bad and for some reason it also must be working in order for the door locks to work. Put in a new cigarette lighter fuse and the door locks worked again!

Jan 19, 2010 | 2004 Chevrolet Tahoe

3 Answers

Power windows wont work


2003 chevy tahoe , none of the switches on the driver door works, mirros, door, locks.

Oct 02, 2009 | 2003 Chevrolet Tahoe

1 Answer

How do I reprogram a key fob on a 1996 chevy tahoe


You will need a jumper wire to jump pins 4 and pin 8 on the ALDL under the dash. Then hold both the lock and unlock buttons together on the key fob until the locks cycle, program complete!!

Sep 01, 2009 | 1996 Chevrolet Tahoe

1 Answer

1999 chevy tahoe when it gets wet doors lock.


they're shorting from the water running down the inside of your door...pull the door panel and install a sheet of plastic over the window controls with duct tape at the top, sortof like a "flap" over the top of the window switches...make it 5-6 wider than the switch area.
Your window "sweep" (at the top of the door) is most likely shot.
Good Luck

Jun 14, 2009 | 1999 Chevrolet Tahoe

2 Answers

Alarm problem on 2004 chevy tahoe


you will have to write your vehicles vin number down wich is if you look throught the windshild on the drivers side you will see it its a little plate with numbers but right down the vin number and take you drivers license and Registration with you to the chevy dealer ship and request the remote for that vehicle. and they should be able to get you one. as far as i know the remote is the only way to get the alarm off. I hope this helps you

Mar 21, 2009 | 2004 Chevrolet Tahoe

1 Answer

2004 Chevy Avalanche seats go in a 1996 Chevy Tahoe


The front seats I know will work but as far as the back seats they wont because the shape of the truck..

Nov 18, 2008 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
1991 Mercury Topaz 4 Door Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...