Question about 2003 Kia Rio

1 Answer

Owners manual but i dont have the owners manual cause my ex threw it out..would it be the last 4 digits of the vin number?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

6
just get it off the rego sticker or rego slip
write down the lot and go to dealer

Posted on Jul 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I managed to cancel code to reset the radio for my Toyota Corolla 2007 Ascent after I changed a new battery. What should I do now with 3 lines --- appear? Do I have to key in my own choice of numbers?


toyota ascent are fitted with different radios during the model production run

the glove box owner manual should have a card with a 3 or 4 digit number you enter into the radio
.if missing contact or take the ascent to a toyota service center and you get the correct code using the vin number

May 31, 2016 | 2007 Toyota Corolla

4 Answers

How to find the antitheft code for the radio system


Call (1-888-648-7820)

As part of the radio's anti-theft system on some older model year vehicles (2002 and older), the radio resets itself whenever it loses power from the vehicle's battery. Radio security codes are associated with each individual radio unit rather than the vehicle identification number (VIN) (since a vehicle could have the radio replaced). The radio security code must be input in the radio in order for the radio to work.

When you purchased your vehicle, you should have received a card that lists the four digit security code for the radio. If you are unable to locate this card (sometimes owners find it inserted in the Owner's Manual or glove box), the radio will need to be removed so that you can locate the Part Number and Serial Number for your specific radio. The Part Number typically begins with the letters 'MR' and the Serial Number is generally a string of digits and both numbers can be located on the audit unit's chassis.

stereo.jpg
stereo_card.jpg

Please contact your local Authorized Mitsubishi Dealer if you need assistance removing the radio. Once the Part Number and the Serial Number are in hand, your Dealer can access the security code for that radio. You may also contact our Customer Relations Call Center at 1-888-MITSU2011 (1-888-648-7820) and one of our agents will be happy to provide you with the security code and steps to reset the radio as long as you have the Part Number and Serial Number for your radio unit. Agents are available Monday-Friday 7 a.m. to 4 p.m. (PT). Best of all they will give it to you free

urnuts73.jpg

Jan 31, 2011 | 1999 Mitsubishi Montero Sport

1 Answer

The stereo doesnt work it says code


Need re-enter the LOCK CODE to activated again; this number code is in the lasts pages from the owners manual. If you dont have this cide, need visit your delaer with the VIN car and ask for this (sometimes, need to ay for this service).

Hope helps.

Nov 06, 2010 | 2001 Acura 3.2CL

1 Answer

My daughter set ofthe alarm in our 1999 Honda Accord EX and we had to dissconnect the battery and every scence then everytime we go to turn the radio on it says error and when we bought the car it didnt...


https://radio-navicode.honda.com/


Retrieve Unlock Codes for
Radio and Navigation Devices Retrieving Your Code You can retrieve your code using this website by providing identity verification and vehicle information in a few simple steps.
Information You Will Need Hours of Operation

Monday to Friday 4:00 AM to 9:00 PM PDT (Pacific Daylight Time)

4:00 AM to 6:30 PM on Saturdays PDT

4:00 AM to 9:00 PM PDT on Sundays.

Oct 11, 2010 | 1999 Honda Accord

1 Answer

I need my 5 digit code that ranges anywhere from 1 thru 6 for a 99 Honda Accord Coupe EX V6. My VIN number is 1HGCG2259XA022114. The radio is the Honda Factory stock radio single disc CD for that year. The...


If I'm for sure I don't think your digit code would be with the vin #. I would check your owners manual or ask a Honda mechanic. Hope this helps!?

Please rate solution - Thanks

May 18, 2010 | 1999 Honda Accord

1 Answer

What is the factory car stereo code for 2001 Audi Allroad?


The RADIO CODE is the security number from device car; generally this is located in the stocker label in back side radio or in the last page of the owners manual. If you dont find it, need call to the delaer and with the VIN and Serial number they can send it to you (sometimes you need to pay for this service).

Hope help.

Apr 16, 2010 | 2001 Audi allroad

4 Answers

Id # 7029224 what year is it?


I am going to say 1942 but just guessing

Apr 15, 2010 | Jeep CJ Cars & Trucks

1 Answer

Hi, have most of the MX5 books but where does this car originate. chassis no.JMONA30P500100161. Its a 1996 into New Zealand from somewhere? Anybody help with this.? Thanks out there


How to read a VIN
1st character- Identifies the country in which the vehicle was manufactured.
For example: U.S.A.(1or 4), Canada(2), Mexico(3), Japan(J), Korea(K), England(S), Germany(W), Italy(Z)
2nd character- Identifies the manufacturer. For example; Audi(A),
BMW(B), Buick(4), Cadillac(6), Chevrolet(1), Chrysler(C), Dodge(B),
Ford(F), GM Canada(7), General Motors(G), Honda(H), Jaquar(A), Lincoln(L), Mercedes Benz(D), Mercury(M), Nissan(N), Oldsmobile(3), Pontiac(2or5), Plymouth(P), Saturn(8), Toyota(T), VW(V), Volvo(V).
3rd character- Identifies vehicle type or manufacturing division.
4th to 8th characters- VDS - Vehicle Descriptor Section. These 5 characters occupy positions 4 through 8 of the VIN and may be used by the manufacturer to identify attributes of the vehicle. Identifies vehicle features such as body style, engine type, model, series, etc.
9th Character - The check digit "character or digit 9" in the sequence of a vehicle identification number (VIN) built beginning with model year 1981 (when the 17 character digit format was established) can best be described as identifying the VIN accuracy.
A check digit shall be part of each vin (since 1981) and shall appear in position
nine (9) of the VIN on the vehicle and on any transfer documents containing
the vin prepared by the manufacturer to be given to the first owner for purposes
other than resale. Thus, the VINs of any two vehicles manufactured within a 30
year period shall not be identical. The check digit means a single number or letter
"x" used to verify the accuracy of the transcription of the vehicle identification
number.
After all other characters in the VIN have been determined by the manufacturer
the check digit is calculated by carrying out a mathematical computation
specified. This is based on vin position, sample vin, assigned value code,
weight factor and multiply assigned value times weight factors. The values are added and the total is divided by 11. The remainder is the check digit number.
The correct numeric remainder - zero through nine (0-9) will appear.
However, if the remainder is 10 the letter "X" is used to designate the check
digit value/number.
10th character- Identifies the model year. For example: 1988(J), 1989(K), 1990(L), 1991(M), 1992(N), 1993(P), 1994(R), 1995(S), 1996(T),
1997(V), 1998(W), 1999(X), 2000(Y)------2001(1), 2002(2), 2003(3)
11th character- Identifies the assembly plant for the vehicle.
12th to 17th characters- VIS - Vehicle Identifier Section. The last 8 characters of the VIN are used for the identification a of specific vehicle. The last four characters shall always be numeric. Identifies the sequence of the vehicle for production as it rolled off the manufacturers assembly line.

Vehicle Identification Numbers (VINs) are used to uniquely identify motor vehicles. Prior to 1980 there was not an accepted standard for these numbers, so different manufacturers used different formats. Modern day VINs consist of 17 characters that do not include the letters I, O or Q.

Jan 04, 2010 | 1996 Mazda MX-5 Miata

1 Answer

How do I find out when my car was manufactured


It's all in the VIN.

A car’s vehicle identification number (VIN) is the automotive equivalent of
human "DNA".

How to read a VIN
1st character- Identifies the country in which the vehicle was manufactured.
For example: U.S.A.(1or 4), Canada(2), Mexico(3), Japan(J), Korea(K), England(S), Germany(W), Italy(Z)
2nd character- Identifies the manufacturer. For example; Audi(A),
BMW(B), Buick(4), Cadillac(6), Chevrolet(1), Chrysler(C), Dodge(B),
Ford(F), GM Canada(7), General Motors(G), Honda(H), Jaquar(A), Lincoln(L), Mercedes Benz(D), Mercury(M), Nissan(N), Oldsmobile(3), Pontiac(2or5), Plymouth(P), Saturn(8), Toyota(T), VW(V), Volvo(V).
3rd character- Identifies vehicle type or manufacturing division.
4th to 8th characters- VDS - Vehicle Descriptor Section. These 5 characters occupy positions 4 through 8 of the VIN and may be used by the manufacturer to identify attributes of the vehicle. Identifies vehicle features such as body style, engine type, model, series, etc.
9th Character - The check digit "character or digit 9" in the sequence of a vehicle identification number (VIN) built beginning with model year 1981 (when the 17 character digit format was established) can best be described as identifying the VIN accuracy.
A check digit shall be part of each vin (since 1981) and shall appear in position
nine (9) of the VIN on the vehicle and on any transfer documents containing
the vin prepared by the manufacturer to be given to the first owner for purposes
other than resale. Thus, the vins of any two vehicles manufactured within a 30
year period shall not be identical. The check digit means a single number or letter
"x" used to verify the accuracy of the transcription of the vehicle identification
number.
After all other characters in the VIN have been determined by the manufacturer
the check digit is calculated by carrying out a mathematical computation
specified. This is based on vin position, sample vin, assigned value code,
weight factor and multiply assigned value times weight factors. The values are added and the total is divided by 11. The remainder is the check digit number.
The correct numeric remainder - zero through nine (0-9) will appear.
However, if the remainder is 10 the letter "X" is used to designate the check
digit value/number.
10th character- Identifies the model year. For example: 1988(J), 1989(K), 1990(L), 1991(M), 1992(N), 1993(P), 1994(R), 1995(S), 1996(T),
1997(V), 1998(W), 1999(X), 2000(Y)------2001(1), 2002(2), 2003(3)
11th character- Identifies the assembly plant for the vehicle.
12th to 17th characters- VIS - Vehicle Identifier Section. The last 8 characters of the VIN are used for the identification a of specific vehicle. The last four characters shall always be numeric. Identifies the sequence of the vehicle for production as it rolled off the manufacturers assembly line.

Feb 28, 2009 | 1991 Ford Explorer

4 Answers

I need code for my 2005 honda accord radio


Check owners manual, made written on inside of covers or on radio pages.  IF not check inside of glovebox for four digit code.  If not luck, remove radio document all number, ie serial number on unit and call local honda dealer.  They must run the VIN and radio info back to the motherland to get lock code.

Dec 17, 2008 | 2005 Honda Accord

Not finding what you are looking for?
2003 Kia Rio Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...