IF U TALKING ABOUT THE AIR CLEANER ITS ON THE LEFT FRONT SIDE UNDER THE HOOD ITS HAS TWO PHILIP SCREW ON TOP OF THE CLEANER BOX OR IF U TALKING ABOUT THE CABIN FILTER SHOULD BE BEHIND GLOVE BOX YOU'LL SEE THE AIR BOX RIGHT IN FRONT OF U THERE A LITTLE DOOR THAT POP OPEN AND U SHOULD FIND THE THE FILTER SLIDE IT OUT
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi I'm litoshop your 911 don't have air filter it has an air cleaner unclip the hot film mass air flow meter cable and open the omega clip on the left side on the air cleaner housing and take out the cable, take out the air cleaner housing out of the engine compartment do the same to install good luck if this information has been helpful please let us know thank you
hi.... It is actually buried under the air cleaner. first remove the air cleaner tube,
throttle body, the thermostat is just below the throttle body in the
aluminum cast housing. two bolts to remove, one was easy the other was
a real $%&^!!. It is behind the exhaust cross over tube. Good luck. TIP - use WD-40 on the air cleaner tubing to get
it to go back on the Throttle body.
It isn't as easy as changing a thermostat sounds.
if you are satisfied with my solution then rate for me...... thank you...
1.Remove the air duct connected to the air cleaner. 2.Disconnect the intake air temperature sensor harness. 3.Remove the air intake hose from the air cleaner side. 4.Remove the air cleaner cover and filter. 5.Remove the air cleaner mounting bolts and remove the air cleaner.
1.Check the air cleaner body, cover, or packing for distortion, corrosion or damage. 2.Check the air duct for damage. 3.Check the resonator for distortion or damage.4.Check the air cleaner element for restriction, contamination or damage.If the element is slightly restricted, remove dust and other contaminants by blowing air from the upper side through the element.5.Check the air cleaner housing for restrictions, contamination or damage.
Installation of the air cleaner is the reverse order of removal