Question about 1999 Dodge Durango

1 Answer

Install rotors How to replace rotors in 99 Dodge Durango?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Jack up car, remove wheel assembly, remove brake caliper after moving pads into piston and retainer. DO NOT LET THE CALIPER HANG! The rotor is now free to come off the spindle....accordianman

Posted on Jul 29, 2008

2 Suggested Answers

awcforever
  • 359 Answers

SOURCE: Crank sensor location 1999 dodge durango

The crank sensor is on the front of the motor on the case of the timing gear. If you want to replace it, the sensor itself isn't the problem, but you have to actually reset your timing, and get it recalibrated. If the timing isn't set, you can possibly damage your engine. But as far as location, it should be fairly easy to find. Hope all works out.

Posted on Feb 22, 2009

csmock132
  • 4669 Answers

SOURCE: Can't git rotors off of a 99 dodge durango. It's

Just keep soaking with wd40 and use a bigger hammer

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What years interchange with a 1999 dodge durango driver's side doors


William, 1999 Dodge Durango, years for drivers door interchange are 1998 to 2000. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Aftermarket Dodge Durango Hood Door Fender Grille Etc Prices Reviews News...
How to Remove Replace Front Door Panel 99 Durango 98 03
https://answers.yahoo.com/question/index?qid=20100413095252AADPNfw

Jun 04, 2016 | 1999 Dodge Durango

1 Answer

I have 98 durango one caliper bolt on front passenger side came out I put new one in and now the brake seems to be locking up


William, did you use the correct bolt(length), did you check all brackets, sliders, seized caliper, pads for damage, free movement, etc.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Brake Pads and Rotors Dodge Durango Dakota 97 03...

How To Replace the Front Brakes on 98 03 Durango

How To Replace Front Pads And Rotors Dodge Dakota

Mar 21, 2016 | Cars & Trucks

1 Answer

How do u replace balljoints on 99 durango


you must remove the spindle to do them ,this means breaks and rotors have to come out,front axle nut has to come out and axle pushed in then remove ball joint nuts and remove spindle.

Jan 20, 2010 | 1999 Dodge Durango

1 Answer

Have no spark or fuel on my 99 durango changed the crankshaft sensor camshaft sensor coil cap rotor still nothin help!!!


check and c if u have fire to the fuel pump.see if it comes on when the key is turned on.check all the fuses and see if each one has fire,and none is broke

Jan 17, 2010 | 1999 Dodge Durango

1 Answer

I have a 1999 dodge durango, bad motor I changed it I am not a dodge person. The motor I bought to put in , was supost to be a 99 318, I find out after I put it in it is a 1994 360. need less to say I have...


MAKE SURE THAT YOU CHECK OUT ALL OF THE WIRES GOING TO AND FROM THE COIL AND IF THEY ARE ALL HOOK UP TAKE THE COIL TO THE PARTS HOUSE AND HAVE THEM CHECK IT OUT FOR YOU

Nov 12, 2009 | 1999 Dodge Durango

1 Answer

I have a 99 Dodge Durango 5.9 that is not getting spark or fuel


The control module in the distributor that signals the coil to fire also signals the fuel pump to operate replace should cost around $50

Oct 11, 2009 | 1999 Dodge Durango

1 Answer

Cant get seized rotor off 01' durango.? tried a hammer.? any ideas.?


You can try liquid wrench or PB Blaster sprayed on the hub and a bigger hammer. It will just take brute force to get it off. For future endeavors, put anti-seize compound on the hub before installing the rotors.

May 27, 2009 | 2002 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...