Question about 1997 Chevrolet Blazer

1 Answer

Where is the evap canister located on a 1997 chevy s10 blazer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,591 Answers

The canaster it self is located on the drivers side rear of the wheel near the bumper has three hoses connecting to it 1 goes to the rollover valve on the fuell tank 1 to the canister vent solenoid on the member over the spare tire and the other 1 to the canister purge solenoid located on the mid left side of the intake manifold . What codes do you get ?

Posted on Jan 28, 2011

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0446 s10 blazer


code p0446 refers to evaporate emission (EVAP)system-vent control--circuit malfunction===causes--wiring--EVAP--canister purge valve--ECM
replace the purge valve

Dec 30, 2013 | Cars & Trucks

1 Answer

How do you replace a blower motor resistor on


It is located on the right rear of the engine compartment. held in by two screws.

Jun 29, 2011 | 1997 Chevrolet Blazer

1 Answer

Where is the windshield wiper motor relay located on a 97 chevy s10 blazer


its located on the wiper motor.there a black removeable cover thats held on by some screws .remove that and it right there

Apr 01, 2011 | 1997 Chevrolet Blazer

1 Answer

My s10 chevy p/u has a leak on the evap canister, I need to know where is it located in the motor


Your evap. canister is large round plastic cylinder in engine compartment. (About the size of coffee can with 2 hoses coming from lid)

Mar 16, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

Where is the location of the blower motor resistor on a 1997 Chevy S10 Blazer?


Under the dash panel in the heater box on the passenger's side next to the blower motor, it's held in by 2 screws.

Jan 13, 2011 | 1997 Chevrolet Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

Were is the evap located on 2001 Chevy s-10 blazer with v6


The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.

47e8f38.jpg

Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve


4d7b3e9.jpg

Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator (1) on 2000-2005 4.8L, 5.3L, 6.0L Engines

Hope this help (remember rated the post).

Mar 26, 2010 | 2001 Chevrolet Blazer

1 Answer

What does code 446 mean on the 1996 Chevy Blazer?


P0446 = Evaporative Emission Control / System Vent Control Circuit Malfunction.

Check it, and before you replace the Evap Canister read this:

Subject: DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005)
Models: 1999-2003 Chevrolet Silverado Models
1999-2003 GMC Sierra Models
--------------------------------------------------------------------------------
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 02-06-04-037 (Section 06 -- Engine/Propulsion System).
--------------------------------------------------------------------------------
Condition
Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

Cause
Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

Correction
After following the Service Manual diagnostic P0446 and determining that the EVAP canister vent valve is the cause of the SES light, replace the existing EVAP canister vent hose assembly with a new assembly, P/N 15086429. This new assembly has an enhanced filtering capability and a filter element that can be easily removed and cleaned. To ensure correct installation, follow the procedure below.

Raise the vehicle. Suitably support the vehicle.
Disconnect the EVAP canister vent valve electrical connector.
Disconnect the vent valve pipe at the EVAP canister.
Remove and retain the EVAP canister vent valve bracket mounting bolt.
Disengage, from the underbody, the two vent valve pipe clips securing the pipe to the underbody.
Remove and discard the complete EVAP canister vent hose assembly.
Position and secure the new assembly to the underbody using the existing hole and mounting bolt.
Tighten
Tighten the bracket mounting bolt to 12 N·m (106 lb in).

Install the two vent valve pipe clips into the existing underbody holes.
Connect the vent valve pipe to the EVAP canister.
Connect the EVAP canister vent valve electrical connector.
Lower the vehicle.
When properly installed, the new EVAP canister vent hose assembly will be positioned outboard of the original installation location. This new location provides clearance for accessing the filter element for cleaning purposes. To access the filter element, disengage the filter cover to valve locking finger by gently lifting the finger upward while simultaneously rotating the filter body clockwise. After approximately 45 degrees of rotation, the filter can be disengaged from the valve by gently pulling outward. The filter cover can then be removed and the filter element and body can be washed with soap and water. Prior to reinstalling, ensure that the body and filter element are dry.

Parts Information
Part Number 15086429 Hose Asm-Evap Emis Cnstr Vent

Hope help with this.

Mar 18, 2010 | 1996 Chevrolet Blazer

3 Answers

Where is the fuel pump relay fuse on my 1996 chevy blazer s10


underhood relay center has fuel pump fuse

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/thomas_c50676e836a18949

Jan 08, 2010 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

2,629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Jonah Oneal

Level 3 Expert

14059 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...