Question about 1995 Chevrolet S-10 CA Edition

1 Answer

Chevrolet S10 How many labor hours does it take to replace a flywheel in a 1995 Chevy s10?

Posted by on

  • jennifer k Jul 23, 2008

    Thank you so much for your answer to this!!! You have been so helpful!! I appreciate it very much! :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

Well,it depends on the facilities you have to work with.Hand tools versus air tools.Professional car hoist,or jackstands and a floor jack.You also did not specify 2wd or 4wd,as a 4wd has 2 driveshafts versus one for a 2wd...etc.You also didn't specify automatic or manual trans.Generally speaking,with the facilities i have at work,and air tools,transmission jack,etc.For a 2wd truck,about 1- 2 hours to remove,and 2-3 hours to reinstall.For a 4wd truck,about 2-3 hours to remove,and 3-4 hours to reinstall.Now that's presuming the truck is from down south and not all rusted up,because rusted bolts adds considerably to labor times,and makes a set of torches mandatory.These times i have quoted are coming from an older man that's slowing down some.In my prime years,i could remove a 2wd trans from your truck in about 30 minutes,so,the time is relative to ability too.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 Chevy s10 blazer with a 4.3 v6 will a 1998 Chevy s10 blazer 4.3 v6 interchange


they should swap just fine. 1996 and on are interchangeable. 1995 could go either way. 1994 and older are interchangeable.

Apr 23, 2016 | Chevrolet S 10 Cars & Trucks

1 Answer

Knocking in transmission by the fly wheel in my chevy s10 1995


Have to remove the transmission to check for rusted
& cracked flywheel

Sep 09, 2013 | Chevrolet S 10 Cars & Trucks

1 Answer

1995 s10 blazer fuel in oil


Google--- Chevy Fuel Pressure Regulator
& Spyder Problems

You will be reading for hours

Mar 16, 2013 | 1995 Chevrolet Blazer

1 Answer

Replace dash lights 1988 chevy s10 pickup


http://www.justanswer.com/chevy/1edpm-change-dash-light-1991-chevy-s10.html

Jun 06, 2012 | 1988 Chevrolet S-10

1 Answer

I have a 1995 Chevy S10 4.6L 2WD Ext Cab truck. Just replaced the transmission and have bled the system. I started the engine and I cannot shift into first gear without grinding the gears. Any suggestions...


If you can see the slave cylinder actuate, then have someone push the clutch down and watch for movement. You should see the release lever move at least a half inch. Let me know if you get movement. I also would like to know if you had the flywheel machined and if you removed, replaced, or added any shims between the ****** and engine block.

Oct 06, 2011 | 1995 Chevrolet S-10 CA Edition

1 Answer

How much will it cost to repair a fuel pump on a 98 S10


Hello! Based upon a $100/hour labor fee...And $125/hour diagnostic fee...




Fuel pump module $250
.3 hrs diagnostic= $30
2.4 hrs replace pump= $240
$520


An approximate cost (without tax) would be $520...Labor figures vary...

Guru....Saailer

Feb 06, 2011 | 1998 Chevrolet S-10 Pickup

2 Answers

I have a 1986 Chevy S10 4X4, Auto.Transmission, Reverse & 1st gear are fine, but will not come outta 1st gear. What can I do? Thanks for any help!


Normal 0 To take off and put back the transmission cost around $700 labor. To open up, repair and put things together, parts and labor start at $800. So the total would be at least $1500.
Buying a used Transmission for $300, and replace the bed one for $700, would cost you $1000 at least.
The question is:
Could you find a dissent transmission of a 1986 Chevy S10 4X4.
The answer is:
Chanced are slim or none.

Aug 14, 2010 | 1986 Chevrolet Chevy

1 Answer

Need diagram of fuel system for 1995 chevy s10


The only way I know of to get the diagram you are looking for is to acquire a "build book". Even dealer service manuals don't have this diagram. I got one from faxonautoliterature for $49 plus shipping. A better bet would be to find a spot on either end of the leak where you can work on it easily and work from there. Hope this helps.

Dec 02, 2009 | 1995 Chevrolet S-10 CA Edition

2 Answers

1995 Chevy S10. The transmission (4L60E) has been


HI YOU MAY HAVE A BAD IGNITION SWITCH OR YEST A BAD SHIFT SOLENOID 3-4

Jun 25, 2009 | 1995 Chevrolet S-10 CA Edition

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...