Question about 1994 Jeep Grand Cherokee

1 Answer

1994 jeep grand cherokee

My alarm system keeps going off and I can't get it to shut off with key I have no keyless remote anymore.I pulled fuse one other time and it fixed it for a minute but it is not working this time. can you just disable the whole thing somehow? please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

You cant disable it realy..but you can use the key to unlock the driver door or the rear door. Both have a alarm shut down wire..Also that wire could be broken in the drive door boot...very common. The wire is purple and yellow..Touching the wire to ground shuts the alarm off. Just make sure if its broke that the end going into truck is the one you groung on the frame. Also locking the doors from the inside with the driver door open is what activates the alarm. That wire can also be found in the drivers side kick panel.....

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I disarm my 2011 jeep grand cherokee alarm? It keeps going off randomly and my remote doesn't shut it off


GOT OPTION "ENTER AND GO"???????????????
did you use both FOBS. car came with 2, try using both , one at a time and not both near car as SAME time. ever.

mines turned off for ever,
i never armed it.
so page what.
wow 6 owners manuals, 4 for Uconnect, wow. pain.
page 22. read that?
sure.
is this not clear ,quoted
The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
Vehicle Security Alarm will arm unexpectedly. If you
remain in the vehicle and lock the doors with the RKE
transmitter, once the Vehicle Security Alarm is armed
(after 16 seconds), when you pull the door handle to exit,
the alarm will sound. If this occurs, press the UNLOCK
button on the RKE transmitter to disarm the Vehicle
Security Alarm. You may also accidentally sound the
Vehicle Security Alarm by unlocking the driver's door
with the key and then opening the door

good luck deciphering this page, wow.!
page 23 is NO ENTER AND GO', OPTION.
Either press the UNLOCK button on the RKE transmitter,
pull on the front driver or passenger door handle (refer to
"Keyless Enter-N-Go" in "Things To Know Before Starting
Your Vehicle" for further information) with a valid
key fob in range, or press the Keyless Enter-N-Go Start/
Stop button (requires at least one valid Key Fob in the
vehicle), or insert a valid Key Fob into the ignition switch
(if the Start/Stop button is removed) and rotate it to the
ON/RUN position.

END QUOTES FROM YOUR GUIDE.
if all this fails get jeep to fix it. (the magic is broken so...)
or ask them to explain, page 23 , in non GREEK..

Feb 27, 2015 | 2011 Jeep Grand Cherokee Laredo

1 Answer

Bought from dealer with no keyless entry. alarm activates when doors are locked with power doorlock system. alarm sounds when we open the door. how do we de-activate the alarm before unlocking the door?


Opening the drivers door with the key is supposed to shut down the factory security but the drivers key cylinder usually goes bad. You will have to unlock the rear tail gate lock cylinder with the key and that will shut down the factory security, before opening the drivers door.Your other option is to have an aftermarket keyless entry system installed, which will open the doors remotely while shut down the factory security at the same time.

Jan 25, 2011 | 1996 Jeep Grand Cherokee

1 Answer

I own a 2005 Jeep Grand Cherokee Laredo 4.7L V8. My keyless entry is broken so I have to manually open the locked driver's door. When I do this, the car alarm goes off until I start the engine. I am...


PLESE DONT EVEN TRY.it aint that simple,the computer tells the engine that you have the right key but as you dont have remote locking anymore it thinks your trying to STEAL it.you NEED to replace the remote fob.(you call it keyless entry)think of it this way if it were that simple why fit an alarm system in the first place....(someone asked if you could take out a fuse to stop the alarm !!!!!.)

Oct 13, 2010 | 2005 Jeep Grand Cherokee

2 Answers

How doyou disarm the factory alarm system in a 1994 jeep grand cherokee my alarm system keeps shutting down the whole car it is a real pain to get it started again i just want to totally shut the alarm...


The security alarm system on the 1994 Jeep Cherokee arms itself on any normal exit from the vehicle, i.e. ignition off, open door, lock door with power door locks, close door. If the doors are locked with the key, it does not arm.
If the battery is disconnected, then reconnected, the alarm system will go into powerup alarm mode. The lights will flash, but the horn will not blow.
The alarms can be disarmed by a keyless vehicle remote or by unlocking either of the front doors or the read lift gate with the key. If the key method does not work with any of those three entrances, there is a problem either with the input to the alarm module or the module itself.
There is a switch in both front doors and the tailgate which is activated by manualy unlocking those doors. The alarms can be disabled by permanently grounding the wire going from either of those switches to the alarm module, but this will remove all theft protection.
The best thing to do is to find out why the system is going off in the first place. It could just be a glitch, a loose connection that can be fixed fairly easily and keep your theft protection intact.

Glenn

Feb 23, 2010 | 1994 Jeep Grand Cherokee

1 Answer

1994 Jeep Cheerokee Laredo: The remote keyless


If it is a factory alarm you can't unhook it. Replace the switch attached to the lock cylinder inside the door. In the meantime, the switch on the passenger door may still be good. Cycle the key in the passenger door to see if it turns off the alarm.

Oct 16, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Alarm activated when it wasn't engaged. Now car won't start runn


some alarms have kill switches, but most of them prevent the car from even starting. i would consider strongly getting the remote for the alarm or Completely disconnect the alarm module.

Aug 06, 2009 | 1994 Jeep Grand Cherokee

1 Answer

1994 JEEP CHEROKEE KEYLESS ALARM REMOTE


is the alarm after market ? and is so you need to replace it with another after market one .. now if the alarm is factory ?...you will need a remote control from the dealer and they will reprogram it for you

Apr 17, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Disarm malfunctioning alarm system jeep cherokee 1999


try to find a fuse and take it out it may have one just a guess

Dec 28, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...